PIONEER AVX7000 Repair Manual

AVX-7000
7. GENERAL INFORMATION
7.1 DISASSEMBLY
-Removing the Detach Grille Assy (Fig.1)
1.Remove the detach grille assy.
-Removing the Grille Assy (Fig.1)
1.Remove the two screws.
2.Disengage the stopper eight of the grille assy.
Grille Assy
3.Disconnect the connector.
Detach Grille Assy
Fig.1
-Removing the Display Assy (Fig.2)Case
1.Remove the five screws.
2.Remove the holder.
3.Remove the case.
4.Disconnect the connector.Holder
5.Pull out the display assy.
Fig.2
Display Assy
-Removing the RGB Unit (Fig.3)
B1.Remove the solder at the 2 points marked with
Arrow X inthe figure.
C
2.Straighten the two tabs indicated by Arrow V.
A
3.Remove the screws A.
4.Disconnect the three connectors indicated by ArrowX,V
Z.RGB Unit
Z
5.Disconnect the connector B , the connector C ,X,V
Fthe connector D and the connector E.
ZD
6.Remove the RGB unit.
E
-Removing the System Unit (Fig.3)
G
1.Remove the screw F.
2.Straighten the three tabs indicated by Arrow G.
System UnitG
3.Remove the system unit.
G
Fig.3
26