BD-V3501, BD-V3510
BD-V3511
FEATURE IDENTIFICATION
FRONT PANELREAR PANEL
BYPASS LIGHTAC POWER INLET
Lights when the optional RF Bypass Adapter module is switchedConnects to an unswitched 120-volt AC outlet, using the
to bypass mode. When in bypass mode, the Adapter sends cabledetachable power cord (included).
signals directly to the TV.AC POWER OUTLET
CHANNEL AND VOLUME CONTROL/Provides AC power to the connected TV.
CURSOR MOVEMENT KEYSCAUTION:
These keys have different functions, depending on what isConnect only the TV AC power cord to this outlet.
displayed on the TV screen. During normal TV viewing, theThis outlet allows 400 watts maximum power consumption. To
5/ (up/down) arrows change the channel by stepping up orprevent the risk of fire or damage to the Home Terminal, do not
down one channel at a time.connect any kind of equipment of more than 400 watts power use,
The 2/3 (left/right) arrows adjust the sound level up or down.or any other equipment (toaster, hair dryer, etc.).
When a menu is displayed, these same keys move the cursor upBASEBAND AUDIO INPUT CONNECTORS
or down, left or right.Connects to the stereo (L and R) audio outputs of a DVD or
CHANNEL NUMBER/TIME DISPLAYLaserDisk player. When the BD-V3500 is off, this audio goes to
Shows channel number or current time. Also shows OrEC� whenthe Baseband Audio Output Connectors.
recording is taking place.BASEBAND AUDIO OUTPUT CONNECTORS
CLEAR/MULTI-PURPOSE KEYConnects to the stereo (L and R) audio inputs of a VCR, audio
When a menu is displayed, returns you to normal TV viewing.amplifier, or TV. Requires audio cables with male phono (RCA)
May also have special functions as described in the on-screenplugs (not included).
display.BASEBAND S-VIDEO OUTPUT CONNECTOR
MESSAGE LIGHTConnects to the S-video input of a TV or VCR. Requires special
Blinks when the BD-V3500 receives a message for you from theS-video cable (not included). If your TV or VCR doesnOt have a
cable company, or an E-mail message from another person.similar S-video jack, use the standard baseband video connection
POWER BUTTONinstead.
Turns on the BD-V3500 and lights the Power-On indicator LightBASEBAND VIDEO INPUT CONNECTOR
when pressed, or turns all off when pressed again. May alsoConnects to the video output terminal on a DVD or LaserDisk player.
control the AC Power Outlet, depending on the BD-V3500OsDuring power standby status, the video is output to the output
settings. (Refer to the separate operating instruction manual.)connector.
POWER ON INDICATOR LIGHTBASEBAND VIDEO OUTPUT CONNECTOR
Lights to show the BD-V3500 is turned on.Connects to the standard baseband video input of a VCR or TV.
REMOTE SENSOR WINDOWRequires video cables with male phono (RCA) plugs (not
Receives signals from the remote control.included).
IMPORTANT:CABLE IN INPUT CONNECTOR
Do not block this window.Connects to the incoming cable service. Requires 75-ohm
SELECT KEYcoaxial cable with male OF�-type connectors (not included).
Selects the desired action highlighted on the screen.DIGITAL AUDIO OUTPUT CONNECTOR
SMARTCARD SLOTConnects to the digital audio input on your stereo amplifier,
Accepts a special card provided by your cable company. Thisreceiver or digital audio decoder.
card is not always needed for BD-V3500 operation, unlessSERIAL PORT CONNECTOR
required by the cable company.Connects to the optional VCR Commander.
TO TV OUTPUT CONNECTOR
Connects to the TVOs VHF antenna input. Requires 75-ohm
coaxial cable with male OF�-type connectors.
USB CONNECTOR
Connects to USB (Universal Serial Bus)-equipped options such
as a wireless keyboard infrared receiver.
IR CONTROL JACK
Jack for connecting the IR CONTROL CABLE (option).
To prevent malfunction, do not connect a cable other than the
dedicated IR CONTROL CABLE.
The IR CONTROL CABLE controls recording of programs on
your VCR through the BD-V3500 program guide. Refer to the
IR CONTROL CABLE instruction manual.
75 |
ACEC
