1234
9.2 INSTALLATION PROCEDURES
Installation Procedures
3. After confirming that the screws installed in step
A
1. Disconnect all cords and cables (including power 2 are tightened securely, install the player on the
cord) attached to the player.
rack.
? To preserve data, be sure that no disc is
Player
loaded in the player.
2. Use the accessory screws to attach the mounting
Rack (EIAcompliant)
brackets to the right and left sides of the player,
using the matching screw holes
(see accompanying illustration).Rack mount
installation
? When attaching the brackets, first insert the four screws andscrew holes
Screws ( )
hand tighten (so the bracket can be moved slightly by
hand). After confirming that the brackets are mounted in Rack mount
the proper positions, tighten the screws securely.bracketsScrews ( )
B
[Caution]
Player
? Do not attempt installation before confirming that the rack is
Rack mount bracket strong enough to sustain the weight of the player and is proper
for the installation location.
? Screws indicated with a star ( ) in the illustration are not
provided for attaching the rack mount brackets to the rack
itself. Select mounting screws that are appropriate in length
and strength for the weight of the unit, installation conditions,
and the rack specifications. The position of the rack mount
bracket holes are shown in this document's
Mounting holes
Accessory mounting screws "Dimensional Diagram".
inside of player
(four for each side)Also, in order to assure safe and secure mounting of the player
C
in the rack, be sure to place screws in all four holes provided in
Precautions during installation
each rack mount bracket.
? The rack mount brackets are identical for right and left sides.
? Installation to the rack should always be performed
? During installation, place the player on a flat, level, and
by two or more persons.
stable table surface. When installing the brackets, raise the
? During installation, take care not to pinch your
player's side some 10 mm or more above the table surface
fingers or other objects between rack mount
to allow easy installation of the brackets.
Attempting to forcibly attach the brackets without raising thebrackets and the rack sides.
player's sides may result in damage to the player.
4. Confirm that the screws inserted in step 3 are
? Use only the mounting screws provided as accessories with
tightened securely before completing the installation
this product. Attempting to use other screws may result in
damage to the player, or the player may fall.? After installation, if the accessory rack mount bracket screws
or the rack mounting screws become loose, vibration caused
by the player's disc rotation or produced by other components
D
may cause distortion in sound reproduction, as well as leading
to the danger of the player's accidental falling. Be sure to
Dimensional Diagram confirm that all screws are tightened securely.
E
296.8
116
3
elongate hole 6 x 10 (4places)
88
76.2
465.1
482.3unit : mm
F
166DVD-V8000
1234 |
ACEC
