CX-916
2. MECHANISM DESCRIPTIONSCentering Arm
Centering Arm
- Loading Operation (when a 12 cm disc is used)Disc Detection Arm
1. Insert a 12 cm disc (the sensor turns on the motorLock Lever
revolution).
2. The disc pushes the Lock Lever in, thereby resetting
the lock currently applied to the Centering Arms.
3. The disc further pushes the Centering Arms in.
4. The right side and left side arms are engaged to
perform centering of the disc.
5. The disc pushes the Disc Detection Arm in, thereby
pushing the Disc Detection Lever forward.
6. Clamping action retracts the Disc Detection Lever
toward forward side, thereby rotating the Relief Arm.
7. The Relief Arm further pushes the Centering Arm in,Disc Detection LeverRelief Arm
thus detaching it from the disc.
Centering Arm
- Loading Operation (when a 8 cm disc is used)Centering Arm
Disc Detection Arm
1. Insert an 8 cm disc (the sensor turns on the motor
Lock Lever
revolution).
2. The disc does not contact against the Lock Lever,
thus centering of the disc is performed by the
Centering Arm being locked.
3. When the right side slot is used, the lock currently
applied to the Centering Arm remains turned on
even if the disc may touch the Lock Lever because
the disc leaves the lever before it reaches the
Centering Arm.
4. Succeeding procedures are the same as that for 12
cm discs.
Disc Detection LeverRelief Arm
- Clamping Operation
1. Insert a disc.
Disc Detection Arm
Clamp Up Arm
2. The Detection Arm pushed forward by the Detection
Disc Detection Lever
Lever turns on rotation of the Jump In Rack.
3. The Jump In Rack then engages with the Two Step
Gear and moves toward right.
4. At the same time, the Mode Selector Lever
connected to the Jump In Rack starts moving toward
right, thereby rotating the Lock Arm and resettingTwo Step
the mechanical lock. The Clamp Up Arm too isGear
rotated by the above action and, thus, the Clamp Up
Arm now being lifted by shape of the cam of the
Clamp Arm is lowered.
And, the Guide Arm is also moved down because of
shape of the cam of the Mode Selector Lever.
Jump In Rack
5. By use of the cam shape, the Jump In Rack being
moved toward right retracts the Disc Detection LeverMode Selector LeverLock Arm
in forward direction, thereby turning on rotation of
the Relief Arm.
17 |
ACEC
