DEH-P90HDD,P900HDD
-Removing the Panel Assy (Fig.3)
Remove the two screws.
Remove the two screws.
Remove the three screws.PANEL ASSY
Remove every connector, then remove two tabs on
the both sides and three tabs on the bottom, then
pull the Panel Assy.
(CAUTION)When reassembling the Panel Assy, insert
the FLEXIBLE PCB at the right side in the picture,
then bend it inward.
Fig.3
-Removing the Digital Unit (Fig.2)
Straight the tabs at four locations indicated.
Disconnect the connector and then remove the Digital
Unit.
-Removing the Tuner Amp Unit (Fig.4)
Remove the screw.
Remove the two screws.
Straight the tabs at three locations indicated.
Remove the three screws.
Remove the two screws and then remove the
Tuner Amp Unit.
Tuner Amp UnitFig.4
110 |
ACEC
