1234
Instruction Manual for Flash Development Tool Kit
A
Preparation: Connect the DJM-800(efx1000) and your PC, using the RS-232C jig.
Note: After the above connection is made, when the DJM-800 is turned on, it will enter Writing mode. In Writing mode, all the
LEDs remain unlit. However, when the DJM-800(efx1000) is turned on or off, it clicks.
Y How to confirm the port to be used on your PC
Double-click on System in Control Panel, or right-click on Click on the Port Setting tab and select 19200 in the bps
My Computer and select System Properties. Click on the box.
Hardware tab and select Device Manager. You can confirm
Bthe port at Port (COM and LPT).
C
Set the baud rate of the port to be used to 19200.
Example: COM1
Double-click on the port name to be used.
D
Click on OK. The setting is completed.
E
F
142DJM-800
1234 |
ACEC
