14E2-RU
21E2-RU
AND AUDIO)
Waveform and others
.
.Then
.
fective.10-2
. Select D/K and check. Select B/G and check
AL" mode. Check again. Select I and check the
. Then, select the "NTSC
(Continued)
.
TION CHECKING (VIDEO
Adjusting procedure/conditions
the COLOUR SYSTEM key to select modes ex- cept PAL, check the COLOUR is not working prop- erly. Then, select the "Pits colour so that it is working properlyCOLOUR SYSTEM key to select modes except SECAM, check the COLOUR is not working prop- erly. Then, select the "SECAM" mode. Check again its colour so that it is working properlythru AV, press COLOUR SYSTEM key to select modes except N4.43/3.58, check the COLOUR is not working properly4.43/3.58" mode. Check again its colour so that it is working properlySYSTEM" to select B/G, I. Check the sound out- put is not working properly the sound output to make sure it is working prop- erly.TEM" to select B/G, D/K. Check the sound output is not working properly sound output to make sure it is working properlySYSTEM"to select I, D/K. Check the sound out- put is not working properly the sound output to make sure it is working prop- erly.sure the sound is heard from the speakers. put the unit in no signal state.
1.Receive the "PAL COLOUR BAR" signal, press2.Receive "SECAM COLOUR BAR" signal, press3.Receive "NTSC 4.43/3.58 COLOUR BAR" signal1.Receive "PAL-D/K" signal, press the "SOUND2.Receive "PAL-I" signal, press the "SOUND SYS-3.Receive "PAL-B/G" signal, press the "SOUND1.Receive "PAL COLOUR BAR" signal. 2.Turn up the volume control to maximum, make3.Check the sound mute is ef 4.Finally turn sound level of CTV to minimum.Check OSD LANGUAGE quantity and type as English and Russian.
COLOUR SYSTEMSOUND SYSTEMNOISE MUTE CHECKINGOSD LAN- GUAGE QUANTITY CHECK
FUNCTION OPERANo.Adjusting point9101112
, bright,
AND AUDIO)
Waveform and others
mean contrast, colourtint, sharpness are all in nor- mal setting.
Notes:If nothing is display
AV in.
TINT, UPAFT ON
.TEMP.
10-1
fect is OK or not.TINT.
fect is OK or not.
fect is OK or not.
TION CHECKING (VIDEO
Adjusting procedure/conditions
CONTRAST: MAX COLOUR: CENTER BRIGHTNESS: CENTER TINT: CENTER SHARPNESS: CENTER
CONTRAST effect is OK or not.the COLOUR efthe BRIGHTNESS effor GREEN direction and DOWN for PURPLE di- rection whether is OK or not.the SHARPNESS efchannel number in green colour under condition.is pressed, all the settings will be present to nor- mal setting. (Normal setting value for every mode).E E E E ETEMP Option, STANDARD: NORMAL SETTING, WARM for more REDDISH direction changing, COOL for more BLUISH di- rection changing.
1.Receive "Monoscope Pattern" signal. 2.Set P-Mode to select CONTRAST3.Press Volume Up/Down key to check whether the1.Receive "Color Bar" signal. 2.Set P-Mode to select COLOUR. 3.Press Volume Up/Down key to check whether1.Receive "Monoscope Pattern" signal. 2.Set P-Mode to select BRIGHTNESS. 3.Press Volume Up/Down key to check whether1.Receive the "NTSC Colour Bar" signal thru 2.Set P-Mode to select 3.Press Volume Up/Down key to check 1.Receive "Monoscope Pattern" signal. 2.Set P-mode to select SHARPNESS. 3.Press Volume Up/Down key to check whether1.All Ch (1~99) will have an OSD display of the1.Once in PICTURE Mode, and theNORMAL key1.Receive "Monoscope Pattern" signal. 2.Set FUNCTION to select WHITE 3.Press Volume Up/Down key to check WHITE
CONTRAST keyCOLOUR keyBRIGHTNESS keyTINT keySHARPNESS KeyCH DISPLAY COLOURNORMAL KeyWHITE TEMP
FUNCTION OPERANo.Adjusting point12345678
10 |
ACEC
