14U10/15
14U20/25
10-2
Y)
UDIO)
.e
um, make ers. Then
orking prop-orking prop-orking prop-
ocedureWaveform or othersxcept NTSC4.43/ocedureWaveform or others
Check the sound out-10-1WHITE TEMP.
attern" signal.AL" mode. Check again50kHz Dev).
orking properly.?
WARM for more REDDISHk the sound output to mak
(Continued)
ANDARD:
TION CHECKING (VIDEO AND A
Conditions/Adjusting prConditions/Adjusting pr
TEMP Option, STNORMAL SETTING, direction changing, COOL for more BLUISH di- rection changing.the COLOUR SYSTEM key to select modes ex- cept PAL, check the COLOUR is not werly. Then, select the "Pits colour so that it is wSYSTEM key to select modes e3.58, check the COLOUR is not werly. Then, select the "NTSC 4.43/3.58" modeCheck again its colour so that it is werly.SYSTEM" to select D/K, I. put is not working properly. Select B/G and checsure it is working propely.sure the sound is heard from the speak put the unit in no signal state.100% MODULATION (output with 400Hz sound and no sound out from speaker.
1.Receive "Monoscope P2.Set FUNCTION to select 3.Press Volume Up/Down key to check WHITE1.Receive the "PAL COLOUR BAR" signal, press2.Receive "NTSC 4.43/3.58" signal, press COLOUR1.Receive "PAL-B/G" signal, press the "SOUND1.Receive "PAL COLOUR BAR" signal. 2.Turn up the volume control to maxim3.Check the sound mute is effective. 4.Finally turn sound level of CTV to minimum.Check OSD LANGUAGE quantity and type as be- low: ENGLISH, only.1.Receive PAL COLOUR PAR with SOUND 400Hz,2.Maximum volume, and check the headphone
COLOUR SYSTEM
Adjusment pointSOUND SYSTEMNOISE MUTE CHECKINGOSD LAN- GUAGE QUANTITY CHECKAdjusment pointHEADPHONE OUTPUT CHECKING
8WHITE TEMP91
FUNCTION OPERANo.101112HEADPHONE JACK CHECKING (FOR 14U20 & 14U25 ONLNo.
10 |