26SL40, 26SL70
29SL80
SERVICEDATA
ADJUSTMENT ITEMADJUSTMENT CONTENTS
NUMBER
INITIAL VALUE RANGE
S01PICTURE5500-7F
S02TINT4600-7F
S03COLOR3200-7F
S04BRIGHTNESS4000-7F
S05SHARPNESS28/2400-3FMust be set to "28"(26SL40/70)/"24"(29SL80)
S06VERTICAL PHASE0000-07Must be set to "00"
S07HORIZONTAL PHASE1200-1F
S08RF-AGC2300-3F
S09VERTICAL AMP2000-3F
S10PIF VCO2C00-7F
S11R CUT-OFF0000-FF
S12G CUT -OFF0000-FF
S13B CUT-OFF0000-FF
S14G GAIN7F00-FF
S15B GAIN7F00-FF
S16TRAP00/0100 or 01Must be set to "00"(26SL40/70)/"01"(29SL80)
S17BALANCE2000-3FMust be set to "20"
S18C.C. POSITION1700-7F
S19MUTE0000,01,03 "00"=Normal, "01"=No Y, "03"=No Vertical
S20ENERGY SAVE OFFSET2000-3FMust be set to "19"
S21D.D.E. OFFSET0300-1FMust be set to "03"
S22OSD SETUP0000-03Must be set to "02"
S23TUNER SETUP0000, 01Must be set to "00"
OP.OPTION (Set to each model)02/3600-FFMust be set 26SL40, "36"=26SL70, 29SL80to "02"=
M01INPUT LEVEL0A00-0F
M02ST VCO2000-3F
M03FILTER1C00-3F
M04WIDE BAND2000-3F
M05SPECTRAL1B00-3F
Only for Models
26SL70, 29SL80
Table - A
Holding down both the CH-up/down buttons on the TV set at service mode for more than 2 seconds will automatically
write the above initial values into IC2101.
ADJUSTMENT
PART REPLACEDNOTES
NECESSARYUNNECESSARY
IC2001XData is stored in IC2101.
The adjustment is needed to compensate for characteristics
IC201Xof parts including IC201 and MTS level (M01).
Holding down both the CH-up/down buttons on the TV set in
the service mode for more than 2 seconds will automatically
IC2101X
write the above initial values into IC2101. Then perform a
complete adjustment.
CRTXAdjust items related to picture tube only.
IC3001XAdjust items related to MTS only (M01~M05).
Table - B
7 |
ACEC
