DV-L70S
DV-L70BL
DV-L70W
6-5. CHECK AND READJUSTMENT
1. Free run check
Adjustment VRR1104
Adjustment PointVisual observation
Input Signal/Setting External input
Check andCheck that the horizontal movement of OSD position is 1 mm or less
Input
Readjustmentwhen inputting a signal in the external input mode with no signal input.
If it is more than 1 mm, adjust it so as to get 1 mm or less.
2. Screen position check
Adjustment VRR1103
Adjustment PointVisual observation of panel
Input Signal/Setting Monoscope full screen
Check andCheck whether the screen is located in the center. If it is not located in the center, adjust it to the
Readjustmentcenter.
3. Luminance/gradation check
Adjustment VRGPOS
Adjustment PointComparison with the standard set
Input Signal/Setting 10STEP signal
Check andCheck whether the luminance and gradation of 10STEP signal are not different in comparison
with the standard set. If they are different, adjust them so as to get equal to the standard set.
4. Depth check
Adjustment VRS depth
Adjustment PointComparison with the standard set
Check andCheck whether the depth of color is not different in comparison with the standard set. If it is
Readjustment different, adjust it so as to get equal to the standard set.
5. Tint check
Adjustment VRS tint
Adjustment PointComparison with the standard set
Check andCheck whether the tone is not different in comparison with the standard set. If it is different, adjust
Readjustmentit so as to get equal to the standard set.
12 |
ACEC
