DV-L88S/S(H)
DV-L88W/W(A)
CHECK AND READJUSTMENT
Adjustment Item Adjustment MenuAdjustment PointSignal/SettingAdjustment Contents
1Free runR1933OSD characterExternal input Check that the horizontal movement of OSD
check(VR)visual observation(625/25)position is 2mm or less when inputting a signal
in the external input mode with no signal input.
If it is more than 2 mm, adjust it so as to get
2 mm or less
INPUT
2Screen positonR1914Visual observation ofMonoscope full 95% of the scales for the overcoat scanning
check(VR)panelscreenconfirmation confirm whether it can be seen
(625/25)with the right and left as well in the monoscope
image plane. Center adjustment is done when
a scale can't be seen.
3Luminance/GPOSComparison with the10STEP signal Check whether the luminance and gradation
gradation checkstandard setof 10STEP signal are not different in compar-
ison with the standard set. If they are different,
adjust them so as to get equal to the standard
set.
4Sub colourSBRIGHTComparison with theCheck whether the depth of colour is not diffe-
checkstandard setrent in comparison with the standard set. If it is
different, addjust it so as to get equal to the
standard set.
5Sub tint checkSTINTComparison with theCheck wheter the tone is not different in co-
standard setmparison with the standard set. If it is different,
adjust it so as to get equal to the standard set.
6OSD positonOSDHOSD characterExternal inputCheck the outside input mode, and it confirms
checkvisual observationthat the character of INPUT of OSD is 15mm
? 2mm from the right end of the image plane.
When it deviates, it is confirmed.
15mm
INPUT
14 |
ACEC
