[ ERROR RATE MEASUREMENT]4. To select No. 1 "NEXT," press button [1] on the
remote control unit.
1. Turn the power on, remove the disc from the tray and
close the tray.Fig. e will appear on the screen. VFD will not change.
2. To put the DVD player into test mode, press [1], [2],
[3], [4], and [ON SCREEN] buttons on the remote
E56***D FE*.*** BE*.*** AVD*.*
control unit in that order.TEST4-MEASUREMENT MODE
Fig. a will appear on the screen and the current B/E
version will appear on the VFD. (Fig. b)STATUS: * * * * * * * *
1. TRACKING SERVO ON/OFF
E56***D FE *.*** BE *.*** AVD *.*2. PLAY MODE
AUD_VER :** AUD_IDE :**3. S-CURVE
DEN_CID :** FEI_REV :** VID_REV :**4. AUTOMATIC ADJUSTMENT
1. TEST1-VFD
2. TEST2-REPEAT PLAYRETURN: RETURNEXIT:
3. TEST3-EEPROM CLEAR POWER
4. TEST4-MEASUREMENT MODE
5. TEST5-TEST DISC
Fig. e Next Mode Screen
5. To select No. 2 "PLAY MODE," press button [2] on
EXIT: POWERthe remote control unit.
The screen will not change and the unit open the tray
automatically. VFD will not change.
Fig. a Test Mode Screen6. Load the disc to measure the error rate and press
[OPEN/CLOSE] button or [PLAY] button. The unit
will close the tray automatically and fig. f will appear
on the screen.
Fig. b VFD in Test Mode
E56***D FE*.*** BE*.*** AVD*.*
3. To select No. 4 "TEST4-MEASUREMENT MODE,"TEST4-MEASUREMENT MODE
press button [4] on the remote control unit.DISC:DVD / DUAL LAYER / OPPOSITE
END(or TIME): ******H(or **;**)
Fig. c will appear on the screen and Fig. d will appear
STATUS: * * * * * * * *
on the VFD.
PLAY MODE
1. PLAY
2. JITTOR
E56***D FE *.*** BE *.*** AVD *.*
3. ERROR RATE
TEST4-MEASUREMENT MODE
RETURN: RETURNEXIT:
1. NEXT
2. LASER POWER POWER
Fig. f Play Mode Screen
7. To select No. 3 "ERROR RATE," press button [3] on
the remote control unit.
RETURN: RETURNEXIT:Fig. g will appear on the screen and Fig. d will appear
POWER
on the VFD.
Fig. c TEST4-MEASUREMENT MODE Screen
Fig. d VFD in TEST4-MEASUREMENT MODE
1-7-4TESTMODE |
ACEC
