Section 1
Service Overview
1-1. Cabinet Removal/Installation1-1-2. Removal of CPU Box
Section 1-1 describes each procedure using the illustration1. Remove the top plate. (Refer to Section 1-1-1.)
of BKS-R3219. The BKS-R1617 and BKS-R3216 are the2. Remove the two screws.
same in the procedure (except Section 1-1-3).3. Raise the wiring clip holding the flexible card wire.
4. Pull portion A of the connector (CN1) in the direction
nindicated by arrow 1 and unlock it. Pull the flexible
When installing the top plate, CPU box, or front panel,card wire in the direction indicated by arrow 2.
install it in the reverse order of the removal procedure.5. Remove the CPU box in the direction indicated by
arrow 3.
1-1-1. Removal of Top Platen
When installing the flexible card wire, put it with the blue
Remove the two screws, then remove the top plate in theband up.
direction indicated by the arrow.
Portion A
CN1
1
Top plate2
Portion
A
B 3x6
Blue band1
3
B 3x6
CN1
Wiring clip
CPU box
BKS-R1617/R3216/R32191-1 (E) |
ACEC
