1-4. Cleaning
1-4-1. Cleaning of Viewfinder1-4-2. Care After Using at Special
Environment
By extracting VF tube sub assembly, lens and MC protec-
tor can be easily cleaned. And also dust on the CRTIt is recommended to check the following items after
surface or mirror can be easily cleaned off.gathering the news at seaside, dust area or spa.
1. Turn the hold ring to the left and extract the VF tube1. Clean off sand and other dust in the unit carefully.
sub assembly.2. Do not allow salt in seawater or sulfur in spa to contact
2. Detach the eyecup.a not-painted surface of the cabinet. They may cause to
3. Remove the MC protector with a commerciallycorrode. Clean with alcohol immediately if contacted.
available camera lens cleaner. Blow off dust with a3. Clean the connection surface of connectors.
blower carefully so as not to flaw the mirror.4. Carry out the common operation check.
4. After the cleaning is completed, install by reversing
the preceding steps. Align red lines of the VF tube and
VF tube sub assembly when inserting, and turn the
hold ring to the right until it locks.
n
Y Do not use any type of solvent, such as alcohol, benzine
or thinner to remove stains.
Y Be sure to attach the eyecup to the VF, or the MC
protector may come off.
Y To protect the viewfinder lens from drops, put the MC
protector in the filter holder and attach the eyecup
securely.
Hold ring
Align red lines
MC protector
VF tube sub
assemblyFilter holder
Eyecup (S)
Eyecup cushion
1-2(E)BVF-V20W/V20WCE |
ACEC
