SECTION 4
TEST MODE
4-1. AF MODETable 4-1.
Connect the TP19 (AFADJ) on the BD board to the ground and
ButtonDisplayButtonDisplay
turn on the power supply.
The AF mode is then activated and the following check can bePUSH
TIME 0924
made.ENTER
PLAYEDIT/
1027
4-1-1. Fluorescent Indicator Tube CheckMODETIME FADE
After confirming display of all on, keep pressing the following
AUTO
button, and the following display is attained.18REPEAT28
SPACE
PEAK
� (PLAY) buttonCHECK1929
SEARCH
CLEAR20p33
FADER21(01
022P02
¤all light
)23
OPEN/CLOSEup
(Display: 01)
4-1-3. Remote Commander Check
P (PAUSE) button
All buttons are assigned with numbers respectively.
24If a button is kept pressed, its button number is displayed on the
6810FL display tube of main unit. (Table 4-2)
1214
161820
(Display: 02)
(
A track number on FL display tube increases if = AMS +
knob is rotated in + direction, or decreases in = direction.
button number
Keep pressing the¤OPEN/CLOSE button, and all on display is
display
attained again.
4-1-2. Key Check
All buttons are assigned with numbers respectively, and when each
button is pressed, it is counted and its number is displayed. Up to
O16� can be counted.
A button pressed once is not further counted but the number is
displayed. (Table 4-1)
((
count displaybutton number
display
� 11 � |
ACEC
