Y When selecting the different images for each split
plane:
1 Press the arrow button to move the white
frame to the image you want to print, then
press ENTER. (The blue frame appears inside
the white frame.)
2 Repeat step 1 to select images for the split
planes in the desired order.
The pictures are placed
from the upper left to the
lower right on the sheet in
Re-selecting the image
order of the selection, not
Move the white frame to
in order of the image list.
the image you want to
cancel the selection for
You can also select an image from the different
and press ENTER. The
blue frame disappearspages.
and the selection isMaking Various Prints
If you select more images than the number of
canceled.
the split planes, the images are automatically
If you want to re-select
placed on the next print.
the image after displaying
the actual print image,
press PICTURE to return
to the thumbnail screen,To check the actual print image
then repeat step 2.
Press CAPTURE.
Re-selecting the type ofThe actual print image appears in the center of the
the splitscreen.
Press PICTURE so that
To display multiple split prints, press V or v.
the thumbnail screen
appears. Re-select the
split type using the print
mode dial. You can use
the selected images, or
change the selection.
Canceling the operation
When you select 4-When you select 4-
Press CLEAR ALL. The
split printing using asplit printing using
selected image is removed
same imagedifferent images
and the printer returns to
stand by mode.
Perform printing3Press PRINT.
procedures from the
beginning.The print indicator flashes while printing, and the
selected image is printed.
Note
If you press PRINT when
the actual print image is
displayed, only the
displayed image is
printed.
Making Various Prints29GB |
ACEC
