DSC-P9
9. White Balance Adjustment (SW-368 Board)
Correct the white balance.
If deviated, the LCD screen color cannot be reproduced.
ModePLAY
SignalArbitrary
Measurement Point
Check on the LCD screen
Measuring Instrument
Adjustment PageA
Adjustment Address88, 89
Specified ValueLCD screen must not be colored
Note 1:Check the white balance only when replacing the fol-
lowing parts. If necessary, adjust them.
1. LCD panel
2. Light induction plate
3. IC801
Adjusting method:
Order Page Address DataProcedure
100101
2A0203Press PAUSE button
34F102
Press PAUSE button.
4A8894
(Initial value)
Press PAUSE button.
5A897A
(Initial value)
Check that the LCD screen is
not colored. If not colored,
6
proceed to OProcessing after
Completing Adjustments�.
Change the data so that the
88
7ALCD screen is not colored.
89
(Note 2)
Note 2:To write in the non-volatile memory (EEPROM), press
the PAUSE button each time to set the data.
Processing after Completing Adjustments:
Order Page Address DataProcedure
1A0200Press PAUSE button
24F100
300100
5-38 |
ACEC
