Adjusting the shape of the picture Adjusting the color of the picture Adjusting the quality of the picture SelectTo
(GEOM)(COLOR)(SCREEN) turn the moire cancellation function ON or OFF
CANCEL MOIRE*
The GEOM settings allow you to adjust the rotation and shape of The COLOR settings allow you to adjust the pictureOs color The SCREEN settings allow you to adjust the quality of the ADJ (MOIRE ADJUST) appears
the picture.temperature by changing the color level of the white color field. picture by controlling the convergence, moire, and landing.in the menu when you select ON
The rotation setting is stored in memory for all input signals. All Colors appear reddish if the temperature is low, and bluish if the Y If you see red or blue shadows around letters or lines, adjust the adjust the degree of moire
ADJ
other settings are stored in memory for the current input signal.temperature is high. This adjustment is useful for matching the convergence.MOIRE ADJUSTcancellation until the moire is at a
monitorOs colors to a printed pictureOs colors.Y If elliptical or wavy patterns appear on the screen, cancel the minimum
1Press the joystick.This setting is stored in memory for all input signals.moire.
The main MENU appears on the screen.Y If the color is irregular at the corners of the screen, adjust the * Moire is a type of natural interference which produces soft, wavy lines
1Press the joystick.landing.on your screen. It may appear due to interference between the pattern
2Move the joystick to highlight GEOM and press The main MENU appears on the screen.The CANCEL MOIRE and MOIRE ADJUST settings are stored of the picture on the screen and the phosphor pitch pattern of the monitor.
the joystick again.in memory for the current input signal. All other settings are
The GEOMETRY menu appears on the screen.2Move the joystick to highlight COLOR and press stored in memory for all input signals.
Example of moire
the joystick again.
3First move the joystick up or down to select the The COLOR menu appears on the screen.1Press the joystick.
desired adjustment item. Then move the joystick left The main MENU appears on the screen.
or right to make the adjustment.3Move the joystick left or right to select a color
temperature.2Move the joystick to highlight SCREEN and
SelectTo The preset color temperatures are 5000K, 6500K, and 9300K. press the joystick again.
Since the default setting is 9300K, the whites will change The SCREEN menu appears on the screen.
ROTATIONrotate the picturefrom a bluish hue to a reddish hue as the temperature is
expand or contract the picture sideslowered to 6500K and 5000K.PINCUSHION3First move the joystick up or down to select the Note
desired adjustment item. Then move the joystick left The picture may become fuzzy when CANCEL MOIRE is set to ON.
PIN BALANCEshift the picture sides to the left or right4If necessary, fine tune the color temperature.or right to make the adjustment.
adjust the picture width at the top of First move the joystick up or down to select the desired KEYSTONE
the screenadjustment item. Then move the joystick left or right to make ENSelectTo
the adjustment.
shift the picture to the left or right at
KEY BALANCE horizontally shift red or blue shadows
the top of the screenCOLORH CONVERGENCE
16500K 9300K
R BIAS76 vertically shift red or blue shadows
G BIAS50
Enlarging or reducing the picture B BIAS50R GAIN50V CONVERGENCE
(ZOOM)G GAIN50B GAIN50 TOPvertically shift red or blue shadows at
1-5V CONVER TOPthe top of the screen
This setting is stored in memory for the current input signal.vertically shift red or blue shadows at
1Adjusting the BIAS (black level) BOT
the bottom of the screen
This changes the brightness of both the dark and light V CONVER BOT
1Press the joystick.
The main MENU appears on the screen.areas of an image. select one of the four corners of the
2Adjusting the GAIN (white level)LANDINGscreen
2Move the joystick to highlight ZOOM and press This changes the contrast of just the light areas of an :top left:top right
the joystick again.image.:bottom left:bottom right
The ZOOM menu appears on the screen.
reduce any irregularities in the color
You can adjust the R(Red), G(Green), and B(Blue) ADJ
3Move the joystick left or right to enlarge or reduce component of the input signal when making changes to items LANDING ADJUSTof the corner selected in LANDING
to a minimum
the picture.1 and 2.
NoteIf you fine tune the color temperature, the new color settings
Adjustment stops when either the horizontal or vertical size reaches its are stored in memory for each of the three color temperatures
maximum or minimum value.and item 3 of the on-screen menu changes as follows:
Y [5000K] t [1]
Y [6500K] t [2]
Y [9300K] t [3]
1213 |
ACEC
