EXPERT modeSetting the color temperature for each of the Restoring the color from the EASY or sRGB menus
Additional settings (OPTION)
You can make additional adjustments to the color in greater detail video input connectorsThe colors of most display monitors tend to gradually lose brilliance
by selecting the EXPERT mode.You can set the fine tuning of the color temperature in EASY or over several years of service. The IMAGE RESTORATION feature You can manually degauss (demagnetize) the monitor, change the
EXPERT mode for each of the video input connectors (HD15 and found in the EASY and sRGB menus allows you to restore the color menu position, and lock the controls.
COLOR
BNC).to the original factory quality levels. The explanation below
EASYEXPERTs RGBexplains how to restore the monitorOs color from the EASY menu.
1Press the joystick.
5000K6500K9300 K1Select the same adjustment mode and color
R BIAS50The main MENU appears on the screen.
G BIAS50temperature in the COLOR menu for both HD15 and 1Move the joystick left or right to select EASY or
B BIAS50sRGB mode.
RGAIN50BNC.2Move the joystick to highlight OPTION and press
GGAIN50
BGAIN50the joystick again.
2Fine tune the color temperature in each menu for 2First move the joystick up or down to select The OPTION menu appears on the screen.
HD15 and BNC. (IMAGE RESTORATION). Then move the
1Move the joystick up or down to select the color The settings are stored in memory for each of the HD15 and joystick to the right.3Move the joystick up or down to select the desired
temperature row 1. Then move the joystick left or BNC connectors.The picture disappears while the color is being restored (about adjustment item.
right to select a color temperature.2 seconds). After the color is restored, the picture reappears Adjust the selected item according to the following
For information on how to select the connector, see page 9.on the screen again.instructions.
2Move the joystick up or down to select the
adjustment item 2. Then move joystick left or right sRGB modeNotes
to adjust the BIAS (black level).The sRGB color setting is an industry standard color space Y Before using this feature, the monitor must be in normal operation mode (green power indicator on) for at least 30 minutes. If the monitor Degaussing the screen
This adjusts the dark areas of an image.protocol designed to correlate the displayed and printed colors of goes into power saving mode, you must return the monitor to normal The monitor is automatically demagnetized (degaussed) when the
sRGB compliant computer products. To adjust the colors to the operation mode and wait for 30 minutes for the monitor to be ready. power is turned on.
3Move the joystick up or down to select the sRGB profile, simply select the sRGB mode in the COLOR menu. You may need to adjust your computerOs power saving settings to keep To manually degauss the monitor, first move the
adjustment item 3. Then move the joystick left or However, in order to display the sRGB colors correctly (3=2.2, the monitor in normal operation mode for the full 30 minutes. If the joystick up or down to select (DEGAUSS). Then
right to adjust the GAIN (white level).6500K), you must set your computer to the sRGB profile and monitor is not ready, the following message will appear.move the joystick to the right.
This adjusts the light areas of an image.adjust the brightness () and contrast (6) to the numbers shown The screen is degaussed for about 2 seconds. If a second degauss
in the menu. For information on how to change the brightness COLORcycle is needed, allow a minimum interval of 20 minutes for the
You can adjust the R (red), G (green), B (blue) component of () and contrast (6), see page 11.EASYEXPERTs RGBbest result.US
the input signal when making changes to items 2 and 3.
1-65000K6500K9300 K
Note5000K
If you fine tune the color temperature, the new color settings Your computer and other connected products (such as a printer), must be IMAGEChanging the menuOs position
are stored in memory for each of the three color temperatures sRGB compliant.AVAILABLEChange the menuOs position if it is blocking an image on the RESTORATION
and item 1 of the on-screen menu change as follows.COLORAFTER WARM UPscreen.
Y [5000K]t[1]To change the menuOs on-screen position, first move
Y [6500K]t[2]EASYEXPERTs RGBthe joystick up or down to select (OSD H POSITION)
Y The monitor may gradually lose its ability to perform this function due
Y [9300K]t[3]:56:76 FORsRG Bto the natural aging of the picture tube.for horizontal adjustment, or (OSD V POSITION) for
IMAGEvertical adjustment. Then move the joystick left or right
RESTORATIONONto shift the on-screen menu.
Locking the controls
To protect adjustment data by locking the controls, first
move the joystick up or down to select (CONTROL
LOCK). Then move the joystick to the right, to select
ON.
Only the 1 (power) switch, EXIT, and (CONTROL LOCK)
of the OPTION menu will operate. If any other items are
selected, the mark appears on the screen.
To cancel the control lock
Repeat the procedure above and set (CONTROL LOCK) to OFF.
1415 |