To Review/Modify Programmed Sequence:
Sequence ProgrammingIf program steps are partially or completely programmed, yet the
sequence has not been started, the programmed cook functions
(on some models)can be reviewed.
Sequence Programming allows you to program at one time up to 1. Press REVIEW STEPS. Step 1 will appear in the display
four cook functions, and can be used at the same time with other Subsequent presses of REVIEW STEPS will cause display of
oven functions, such as the Timer and Warming Drawer.programmed steps in order.
Sequence Programming takes precedence over any non-?STEP? and ?RECALL? will appear on the display. The
sequenced cook function. For example, if an un-timed Bake number of the displayed step will flash. A recalled step will
function is in process and a sequence program is started, theremain lit on the display for 5 minutes if no further action is
un-timed Bake function will be canceled, and the program taken.
sequence will start.
2. If fewer than four steps have been programmed, press
All steps of a sequenced program, except for the last step, must REVIEW STEPS repeatedly until the last programmed step is
be programmed with a stop time. If a stop time is not entered for
a step in the sequence program, and the FIRST/NEXT STEP pad displayed, then press FIRST/NEXT STEP if it is desired to
is pressed, three tones will sound.program an additional step.
While a step is recalled, a cook function pad can be used to
To Program the First Step of the Sequence:change the function, or the TEMPERATURE ?up? or ?down?
1. Press FIRST/NEXT STEP.arrow pad can be used to change the set temperature.
?PROGRAM? and ?STEP? will appear on the display. A START TIME, when used with the HR or MIN ?up? or ?down?
flashing ?1? will also appear on the display, indicating that arrow pads, can be used to change, add or delete a delayed
step 1 is being programmed.start.
2. Choose the desired cook function by pressing any cook STOP TIME can be used to change the stop time. Changing
function key.the stop time of a step will automatically change the start
Press TEMP "up" or "down" arrow pad (if desired) to select times and stop times of all subsequent programmed cook
temperature.functions.
3. Press START TIME, then HR and MIN ?up? or ?down? arrow 3. After Review/Modification of the programmed sequence is
pads to set the time of day for the first cook function to begin.complete, press START to begin sequence.
If START TIME is not pressed, then the sequence of cook To Modify Sequence Programming:
functions will begin immediately once programming is 1. Press UNDO.
complete and START is pressed.
The last step of the sequence will be cancelled, and the step
The display will show either the time of day (if start time was prior to the cancelled sequence will show on the display for
not programmed) or the start time (if same was programmed), either review or modification.
but with a flashing colon. ?Stop? and ?Time? will also appear
on the display.If the programmed sequence has not been started, see "To
Program Next Steps of the Sequence" section to program a
4. Press STOP TIME, then HR and MIN ?up? or ?down? arrow step to replace the cancelled cook function.
pads to set the time of day for the first cook function to stop.
2. Press START.
To Program Next Steps of the Sequence:The first step will show on the display and the program
1. Press FIRST/NEXT STEP.sequence will begin.
?PROGRAM? and ?STEP? will appear on the display. The Changes can be made to the STOP TIME during a
number of the steps being programmed will flash.programmed cook function; however, changes cannot be
?START? and ?TIME will appear on the display.made after a programmed cook function has been
completed.
2. Choose the desired cook function by pressing any cook
function key.If at any time during an active sequenced program FIRST/
NEXT STEP is pressed, three tones will sound.
Press TEMP ?up? or ?down? arrow pad (if desired) to select
temperature.
3. Press STOP TIME, then HR and MIN ?up? or ?down? arrow
pads to select stop time.
4. Press START to begin sequence.
5. Press OFF/CANCEL at any time to clear program and to stop
program.
14 |
ACEC
WHIRLPOOL
