DeŢning settings via the SCROLL and SELECT buttons
Its likely that youOll change these settings much more often than the settings that
you deŢne through the settings menus. The settings can change from picture to
picture depending on the conditions that exist at the time.
+You must be in the Capture mode to change these settings.
Setting Flash, Exposure, Picture Type, and Quality
To change the Flash, Exposure, Picture Capture mode settings:Type, and Quality
1Press the SCROLL button to scroll through
the Ţrst four functions on the Status
display: Flash, Exposure, Picture Type, and
Quality.
2When the function you want to change is
�ashing, press the SELECT button to
toggle through the choices for the active
function.
The new selection takes affect if you press
the SCROLL button again to move to
another function or if you do not press a
button for 5 seconds.
Setting the Self-Timer and Close-up settings (DC220 only)
To activate the Self-Timer and Close-up settings:
1Press the TIMER button:
4once to activate the self-timer
34twice to activate the close-up setting
Taking pictures
4three times to activate both settings
4four times to turn both settings off again
+On the DC260, activate the self-timer
by pressing the TIMER button.
3-13 |
ACEC
