USER?S GUIDE SAESx4CLKx6GENx6GENx6-96
DiDigitgitalal AuAudiodio DDististribribututionion PPrroodduuccttss
GENx6-96 oooo Word/Superclock Generatorno audio data).
DescriptionPOWER Supplied by external Lucid PS-3, PS-3E, or PS3-J
?power supply.
The GENx6-96 is used to distribute word clock and super clock,
WORD/SUPER CLOCK OUTPUTS are coaxial BNC connec-
and also act as a clock generator with its four internal clocks
tors, with nominal source impedance of 20 Ohms.
(44.1, 48, 88.2 and 96kHz). It provides 6 buffered clock outputs.
Each output can be either word or superclock. The outputs mayJumper Settings
sync to the internal frequencies or to external word, superclock,
? J5 with positions HIGH or LOW determines the WORD
or AES3/11 clocks.
CLOCK input range.The HIGH range (default) accepts word
Controlsclock frequencies from 40 kHz to 100 kHz whereas the LOW
range accepts word clock frequencies between 30 kHz and 50
The GENx6-96 has 8 switches located on its front panel.
kHz.
? One 3-way toggle switch selects between three possible
external sync sources: AES, WORD CLOCK or SUPER? J4 sets the WORD CLOCK input to either TERMINATED or
CLOCK.OPEN (default). If the jumper is set to TERMINATED, the
? One momentary toggle switch selects between four internaldriver?s source impedance should be 75 Ohms to match the
sample rates or the chosen external sample rate.GENx6-96 ?s input impedance.
? Six 2-way toggle switches determines if the corresponding
Specifications
output is WORD CLOCK (x1 sample rate) or SUPER CLOCK
Electrical
(x256 sample rate).
Input impedance: AES:110 Ohms, Clock: 75 Ohms or Hi-Z,
LEDS
jumper selectable.
LOCK (a stack of 3):
Output impedance: 20 Ohms.
? The upper LOCK LED, labeled AES,indicates if the AES input
External sync range: 32 kHz to 96 kHz.
PLL has locked to an AES3 or AES11 input.
Internal sample rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz.
? The middle LOCK LED, labeled WORD indicates if the word-
clock PLL has locked to a word clock input.Connectors
? The bottom LOCK LED, labeled SUPER (256x), indicates if
AES input: Balanced XLR3
the input PLL has locked to a superclock input.
WORD/SUPER CLOCK INPUT: BNC
ConnectorsWORD/SUPER CLOCK OUTPUTS: 6 x BNC
Power supply: External AC (Lucid PS-3, PS-3E, or PS-3J) using
WORD/SUPER CLOCK INPUT is a coaxial BNC female con-
7-pin DIN connector
nector with nominal input impedance of 75 Ohms. Internal ter-
mination is provided with a jumper.Physical
AES INPUT is a 3-pin XLR connector with nominal input imped-1/2 U Chassis (HxWxD): 1.72 in.x 8.5 in.x 8 in. (4.37 cm x 21.59
ance of 110 Ohms. Internal termination is provided, as per the
cm x 20.32 cm)
AES3 spec.The data can be either AES3 or AES11 (AES3 with
Net Weight: 2.5 lb (1.1 kg)
WORD/SUPERCLOCKGENERATOR
LOCK96
EXTERNALSOURCEOUTPUTS
AES88.2
123456
WORD48
WORD
SUPER(256X)EXT44.1SUPER
WORD/SUPERAES INPUT
MANUFACTUREDBYSYMETRIXINC.LYNNWOOD,WAUSACLOCK
FABRIQUEPARSYMETRIXINC.WORD/SUPER CLOCK OUTPUTSINPUT
654321
CONNECTTO
SYMETRIX
PS-3ORPS-3E
POWER
SUPPLYONLY
THISPRODUCTCONTAINSNOUSERSERVICEABLEPARTS.
PASDESELEMENTSSERVIABLEPARUTILISATEUR.WWW.LUCIDAUDIO.COM
Page 6 of 9 |
ACEC
