AEG 740D-M Instruction Manual

Carbon filter
? The activated carbon filter should only be used if you want to use the
hood in its filtering function.
? To do this you will need an original AEG activated carbon filter (see
special accessories).
? Cleaning/replacing the carbon filter
The activated carbon filter must normally be replaced at least once
every 6 months. This filter cannot be washed or regenerated. To
guarantee proper absorption of odours the working volume of the
activated carbon must be proportionate to the hood air flow. In this
case the high quality of the activated carbon will ensure efficient
odour removal for approximately one year, assuming that the hood is
used normally. For this reason you should always use original AEG
filters only, making sure they are replaced when necessary.
? Mounting
Pull out the drawer.
Remove the grease filters, open the lamp cover support.
Fit the activated carbon filter so that it covers the grilles protecting
the hood motor and fan.
Turn the carbon filter handle in a clockwise direction.
Repeat the above operations for the second activated carbon filter.
Replace the grease filters and the lamp cover support.
? To dismount proceed in reverse order.
? Always specify the hood model code number and serial number
when ordering replacement filters. This information is shown on the
registration plate located on the inside of the unit.
? The activated carbon filter can be ordered from the AEG technical
assistance service.
Fig. 5
40