MalfunctionPossible CauseRemedy
Appliance is not switched on Switch on the appliance.
Mains plug is not plugged inInsert mains plug.
or is loose.
Appliance does not work.Fuse has blown or is defec-Check fuse, replace if
tive.necessary.
Socket is defective.Mains malfunctions are to be
corrected by an electrician.
Appliance cools too much.Temperature is set too cold. Turn the temperature regu-
lator to a warmer setting
temporarily..
Temperature is not properlyPlease look in the "Initial
adjusted.Start Up" section.
Door was open for an exten-Open the door only as long
ded period.as necessary.
The food is too warm.A large quantity of warm food Turn the temperature regu-
was placed in the appliancelator to a colder setting tem-
within the last 24 hours.porarily.
The appliance is near a heatPlease look in the "Installa-
source.tion location" section.
Heavy build up of frost, pos-Door seal is not air tightCarefully warm the leaking
sibly also on the door seal.(possibly after changingsections of the door seal
over the hinges).with a hair dryer (not hotter
than approx. 50 !C). At the
same time shape the war-
med door seal by hand such
that it sits correctly.
Unusual noises.Appliance is not level.Readjust the feet.
The appliance is touchingMove the appliance slightly.
the wall or other objects.
A component, e.g. a pipe,If necessary, carefully bend
on the rear of the appliancethe component out of the
is touching another part ofway.
the appliance or the wall.
The compressor does notThis is normal, no error has The compressor starts after
start immediately after chan- occurred.a period of time.
ging the temperature set-
ting.
14 |
ACEC
