Movable shelves
The walls of the refrigerator are equipped with a series
of runners so that the shelves can be positioned as
desired.
D040
Positioning the door shelf
To permit storage of food packages of various sizes,
central the door shelf can be adjusted in height.
To make these adjustments proceed as follows:
Gradually pull the shelf in the direction of the arrows
until it comes off, then reposition as required.
Ice cube productionPR187
The refrigerator is equipped with one or more ice cube
trays, which should be filled with drinking water and
placed in the special compartment.
Do not use metal implements to detach the trays.
Defrosting
During normal operation, the evaporator in the
refrigerator compartment will gradually become
covered with frost.
This frost is a thermal insulator which inhibits cooling
and must therefore be removed, otherwise there will
be a significant reduction in cooling efficiency and an
increase in electricity consumption.
To defrost, proceed as follows:
1.Turn the thermostat knob on position �OE, making
sure that the stopper of the water collector tray is
firmly inserted in the water drain hole;
2.Once defrosted, turn the thermostat knob on a
medium position to restart the appliance, but the
water which has collected in the tray placed under
the evaporator must be removed.
3.Place a container on the first shelf in the refrigerator
directly under the water drain hole of the defrost
tray and remove the stopper as shown in the figure.
4.Dry thoroughly the ice compartment and replace the
D188
stopper.
11 |
ACEC
