GBGB
Semi-automatic use with cooking time setting PROGRAMMER WITH COOKING END TIME (Fig.6)
Press the cooking time button and set the desired time with + orCARE AND MAINTENANCEINSTRUCTIONS DESTINED TO THE USER
For a manual operation of the programmer, turn the knob
-. The AUTO and cooking time symbols light up continuouslyanticloc. Thekwise to .
relay switches on immediately. When the cooking end timeAdjust the cooking time by turning the knob clockwise.
corresponds to the time of day, the relay and cooking time symbolSelect the cooking time with the relevant knob (max.120 min.).
switch off, the sound signal rings and the AUTO symbol flashes.
The oven will switch off automatically when the cooking is upBefo.re cleaning the appliance, disconnect the gas general
tap and unplug the appliance or disconnect power at theOVERALL DIMENSIONS
Semi-automatic use with end time setting
main circuit breaker of the electrical system.
Press the end time button. The time of day appears on the display.s
0topDo not clean the appliance surfaces when still hot.
Set the cooking end time with + button. The AUTO and cooking01
1
2
time symbols light up continuously. The relay contacts switch on.0
0
2110
When the cooking end time corresponds to the time of day, the
IMPORTANT
relay and the cooking time symbol switch off. When the cooking0Periodically check the external gas connection hole and
31
time is up, the AUTO symbol flashes, the sound signal rings and0
0replace it when it shows any sign of deterioration. Do not
both the relay and the cooking time button switch off.0
49attempt to repair the gas hose under any cincumstances.
0
0
Automatic use with cooking time and end time setting58
0
0 670
Press the cooking time button and select the length of the cookingFig. 6
ENAMELLED SURFACES
time with + or - button. The AUTO and cooking time symbols light1450/1500910/960850/900
Clean with a damp sponge using soap and water.
up continuously. The relay switches on. By pressing the cooking
Grease can be easily removed using hot water or a specific
end time button the next cooking end time appears on the display.
cleansing agent for enamelled surfaces. Do not use abrasive
Set the cooking end time with + button. The relay and the cookingPCI "Campanil"TR 259 Analogic
cleansers.
time symbol switch off.
Setting the clockDo not leave any acid or alkaline substances (lemon juice, vinegar,
The symbol lights up again when the time of day corresponds to895600
100
Press the control knob and turnsalt, etc.) on the enamel.
the cooking start time. When the cooking time is up, the AUTO
clockwise.XIIClean the parts in stainless steel with specific cleansers for
symbol flashes, the sound signal rings, the cooking time symbol
XIIstainless steel surfaces.
and the relay switch off.II
Alarm programme adjustementXThese detergents must be applied using a soft cloth.WARNINGS
Minutes counterTurn the knob clockwise withoutIIIThe technical data are indicated on the data nameplate placed
IX
pressing it in. At the end of theon the rear of the appliance.
Press the minutes counter button and set the cooking time with
VI
programmed time an alarm willGRIDS AND BURNERSThe adjustment conditions are stated on the label applied on the
+ or - button.VIII
V
sound.VIIVITo clean the work-top burners, remove them by pulling upwpackaging and on the applianceards.
The bell symbol lights up when the minutes counter is operating
To cancel it, turn the knob to theand soak them for about 10 minutes in hot water with a littleDo not use the oven door handle to move the appliance, such as
When the set time is up, the sound signal rings and the bell symbol
bell.detergent. After having cleaned and washed them, wipe themto remove it from the packaging.
switches off.
carefully.The appliance is in class 1 or class 2 subclass 1.
Sound signal
Make sure that no burner hole is clogged.
The sound signal starts at the end of a programme or of the
Clean the burners once a week or more frequently if necessarINSTALLAyTION.
minutes counter function and it lasts for 15 minutes.
MAKE SURE YOU HAVE ASSEMBLED THE BURNERS IN AIMPORTANT: The coating of the furniture must be able to withstand
To stop it, push any one of the functions buttons. MECHANICAL PROGRAMMER WITH COOKINGhigh temperatures (min.°C). 90
RIGHT WAY.
START/END TIMEIf the appliance is to be installed near units, leave the minimum
Start programme and checkgaps specified in the table below.
Setting the clock: press knob B and turn it anti-clockwise.
The programme starts 4 seconds after it has been set.
Adjustment of starting time: press
The programme can be checked at any time by pressing the
knob A and turn it anti-clockwise.XIIOVEN DOOR
I
corresponding button.Adjustment of connection time:XI
For some models, the oven door can be disassembled in the
I
turn knob B anti-clockwise withoutOI
Xfollowing way:
Setting errorpressing it in. The end of theA
IIhinges A are provided, for this purpose, with two movable jumpers
A setting error is made if the time of day on the clock falls withinI
connection is announced by anmin. 50 mmmin. 50 mm
IXB; these, once hooked to the hinges slots C, when the door is
the cooking start and end times.
alarm bell, which can be stoppedV
completely opened, block them. After that lift the door outward
To correct the setting error, change the cooking time or cookingby turning knob B to position 0III
VIcarring out the two movements shown in the picture. To do that,
end time.V
without pressing it in. ManualIImin. 650 mmmin. 20mm
Voperate on the door sides next to the hinges. In order to re-min. 20mm
The relays switch off when a setting error is made. connection: turn knob B toVImin.100 mmmin. 400 mm
Bassemble the door, introduce the hinges in their relevant slots.
position I a without pressing
Before closing the door, do not forget to remove the movable
Cancelling a setting
it in.
jumpers B.
To cancel a setting, press the cooking time button and then press
Attention, in proximity of the oven door hinges, there is hurt danger.
the - button until 00 00 appears on the display.
A set programme will automatically cancel on completion.
Instructions and operation PCI TR 331.
MINUTES COUNTERS (Fig.5 )
Turn the knob clockwise to set the desired cooking time.
To set the clock press the knob and
The minutes minder can be adjusted from 1 to 60 minutes.12
turn anti-clockwise.111BC
A sound signal will inform you that the chosen time is up.
To adjust cooking time, turn the
102
knob clockwise without pressingit
in. The end of cooking time is93
5announced by an alarmbell, which5
584
5is cancelled by turning the knob toA
0
10position75
6
The cooker is fitted with 4 legs for an eventual alignment in height
4For manual connection, turn the
5with the furniture. To assemble them, it is necessary to raise the
knob to position .
15
cooker and to screw the four legs into the suitable threadings
40
placed on the corners on the bottom of the appliance ( fig 8).
20
OVEN
55 3
2Clean the enamelled parts with a damp sponge using soap and
30
Fig. 5water. Grease can be easily removed using hot water or a specific
cleansing agent for enamelled surfaces.
Do not use abrasive cleansers.
1617 |
ACEC
