Hood Operation - Model DM 8700
Switching on the hood - Fig. 3
The control ball is a balancer switch.
Depressing the control ball repeatedly towards the right switches on the
hood and you may select the suction level desired, depressing once
again on the right the hood switches off.
Switching on the light - Fig. 3
Depress the control ball towards the left :
once for submersed lighting,
once again for full lighting,
depress again to switch off the light.
depress towards the
depress towards theleft to switch on the
right to switch on thelight.
hood
Fig. 3
Control device for grease or charcoal filter
The air duct, in this hood, is provided with a device that signals when
the filter requires cleaning or changing .
Led signal for grease filter
The LED signal flickers (flickering green light) when the grease filter
requires cleaning, occurs at about 40 operating hours.
Carefully note the device for grease filter maintenance!
Led signal for charcoal filter
The LED signal flickers (flickering orange light) when the grease filter
requires cleaning, occurs at about 160 operating hours.
Carefully note the device for charcoal filter maintenance!
Re-setting the saturation signal
After cleaning the grease filter, select the intensive speed (the control
ball lights up with a red flashing light), depress again and hold
depressed for about 3 seconds until a ?bip? sound indicates the reset.
75 |
ACEC
