152967 81/0en 1-12-2003 11:20 Pagina 11
Operating instructions
1. Open the door of the dishwasher.
2. Press the release button on the
rinse aid compartment.
3. Open the cover.
4. Set the dosage level.
5. Press the lid shut until it clicks
into place.
6. If rinse aid has leaked out, wipe it
away with a cloth.
BR09
Activating/deactivating the inflow of rinse aid
If you press 3 in 1 button, you donOt need to deactivate the inflow
of rinse aid.
When the inflow of rinse aid has been deactivated, the rinse aid
indicator light on the control panel is automatically deactivated.
1. Press the ON/OFF button. The ON/OFF indicator light illuminates.
If other push button indicator lights are on, this means that a wash
programme has been selected. The programme must be cancelled:
press simultaneously the function push buttons 2 and 3 for approx.
2 seconds. All other indicators will turn off.
2. Press simultaneously function push buttons 2 and 3 until the
indicator lights of the function push buttons 1 to 3 start flashing.
3. Press the function push button 2, the indicator lights of function
push buttons 1 and 3 turn off while the indicator light of the
function push button 2 goes on flashing, at the same time the
indicator light ENDE illuminates indicating that the inflow of rinse
aid is active.
4. To deactivate the inflow of rinse aid, press the function push button
2 again, the indicator light ENDE turns off, indicating that the
inflow of rinse aid has been deactivated.
5. To memorise the operation, switch off the dishwasher by pressing
the ON/OFF push button or wait about 60 seconds after which the
dishwasher will automatically return to setting mode.
To activate the inflow of rinse aid follow the above instructions
until the indicator light ENDE illuminates.
11 |
ACEC
