Remote controlMaintenance
Insert two R6 (size AA) batteries.To clean the cabinet
Use a soft cloth lightly moistened with mild
detergent solution. Do not use strong solvents
such as alcohol, benzine or thinner.
To clean the heads
When the tape heads are dirty;
- high frequency sound is not emitted
R6 (AA)- the sound is not adequately high
- the sound is off-balance
When the reach of the remote control signal is less than- the tape cannot be erased
5 meters (16 feet), replace the batteries.
- the tape cannot be recorded on
After every 10 hours of use, clean the tape heads
The remote control may not operate correctlywith a head cleaning cassette.
when:Use separately sold dry-type or wet-type cleaning
- The unit is exposed to intense light, such as directcassette.
sunlightRefer to the instructions of the cleaning cassette
- Objects block the remote control signal to the unitfor details.
To use the buttons on the remote controlTo clean the lensLens
Buttons on the remote control and the main unit withUse a cotton swab
identical indications have the same functions.slightly moistened with
cleaning fluid. Wipe
To turn the power ongently from the center
Press POWER to turn on the display.to the edge.
When using the unit on the batteries, this button will not
turn the power on.
To turn the power off
Press POWER to turn off the display.
When one of the deck operation buttons is pressed, this
button will not turn the power off.
To use the FUNCTION button
Each time FUNCTION is pressed while the power is on,
the function is selected cyclically.
CDRADIO*TAPE
* applicable when one of the deck operation buttons is
pressed
FUNCTION
POWER
ENGLISH 5 |
ACEC
