2 - Replacement30
Remove the antigrease filters and the activated
carbon filter from its seat by acting on the hooksA05_30
(fig. 30). Fit the new activated carbon filter and
the metal antigrease filters.
WARNING: Maintenance or replacement
periods should be respected to avoid any fire
hazards when the filters get saturated with grease.
3.3 - Light
a) It consists of two 40 W bulbs which can beA05_31
accessed by removing the ceiling fixtures (fig.31).
b) If the lamps do not turn on, make sure they are
well screwed in.
c) It the bulbs are burnt out, they must be replaced
with others of the same voltage and watts.
31
3.4 - Cleaning
Normal cleaning operation of the hood:
- Do not use any wet cloth or sponge or water-jet.
- Do not use diluents or alcohol, as they could make the painted surfaces opaque.
- Do not use abrasive products, especially on stainless steel surfaces.
We recommend the use of a damp cloth and any neutral liquid detergent.
20 |