SETUP Operation
PWR-IC ON (CDA-7892: PWR ON):
The speakers are driven by the built-in amplifier.
BANDRotary encoder
Speakers
SPEAKER
RIGHT FRONTFront
right
SPEAKER
RIGHT REARRear
right
g DN f UPSETUP
SPEAKER
LEFT REARRear
left
Connecting to an External AmplifierSPEAKER
LEFT FRONTFront
(CDA-7894/CDA-7893/CDA-7892 only)left
NOTE
When an external amplifier is connected, sound qualityNo sound is produced by the system when the power output is set
can be improved by stopping the power supply of theto OFF
buit-in amplifier. The power output is set to OFF by the
following procedure.4Press the SETUP button to return to normal mode.
1Press and hold the SETUP button for at least 3
Setting the Defeat of the External
seconds.
Input
2Press the f UP or g DN button to select "PWR-
IC" (CDA-7892: "PWR").
When auxiliary devices such as a TV or video game,
etc., are used with this unit, you can use the audio
3Press the BAND button to toggle the mode between
PWR-IC ON (CDA-7892: PWR ON) and PWR-IC OFFfunction to set the mode between BASS, TREBLE and
(CDA-7892: PWR OFF).MX Defeat ON/OFF.
PWR-IC OFF (CDA-7892: PWR OFF):1Press and hold the SETUP button for at least 3
When activating the speakers, this setting can beseconds.
performed by connecting between the front and rear
pre-amplifier of the unit and the external amplifier. In2Press the f UP or g DN button to select "INT."
this setting, nothing is output to the speakers.
3Press the BAND button to toggle the mode between
INT ON and INT OFF.
Front
leftWhen using Initial mode, set this to ON.
AmplifierWhen the Initial mode is not selected, set this to OFF.
Front
right
4Press the SETUP button to return to normal mode.
Rear
left
Amplifier
Rear
right
16-EN |
ACEC
