1gb58913.fm Page 10 Friday, March 5, 2004 12:29 PM
BEFORE USING THE GLASS CERAMIC HOB
? To make the most of your new appliances read the
users instructions carefully and keep them on
hand for consultation in the future.
INSTALLATION
Cooktop
? The cooktop must be set into a worktop
between 20 mm and 50 mm thick.
? Insert a separator panel at a minimum distance
of 90mm from the bottom of the hob so that it
is inaccessible to the user.
? If the cooktop is to be installed next to a
column unit, leave a distance of at least 100
mm from the edge of the cooktop to the side of
the column unit.
? Cut an opening in the worktop of the dimensions
shown in the Product Description Sheet supplied
separately.
? If not already present, fit the supplied seal to the
cooktop flange after cleaning the contact area as
shown in the figure.
N.B.: Remove the protective film before installing the
cooktop.
? If the worktop is made of wood, use the supplied
spring clips and screws.
1. Position the 4 clips D) as sh( own and at the
specified dimensions.
2. Secure the clips using sEc).rews (
3. Fit the cooktop into the worktop.
? If the worktop is made of marble, plastic,
ceramics, natural stone, etc., the cooktop must
be secured with brackets (F) code 4819 404 78697
(to be requested from After-Sales Service).
1. Fit the cooktop into the worktop.
2. Position the 4 brackets F) as sho( wn in the figure,
in accordance with the thickness of the worktop.
3. Fix the 4 screws (G ) in holes H).(
10 |
ACEC
