CARE AND MAINTENANCE OF
CONVENTIONAL ELECTRIC COOKTOPS
Before cleaning the cooktop, disconnect it from Stainless steel cooktop
the electrical supply and wait until it has cooled. Use a proprietary cleaner for stainless steel.
N.B.: prolonged use of the cooktop may result in
Care and Maintenance of conventional slight discoloration of the stainless steel surfaces
electric cooktoparound the hotplates. This is caused by the high
Use a cloth and warm soapy water.
Do not use abrasives, corrosive cleaners, temperature of the hotplates.
cleaners containing chlorine or pan scourers.Cleaning the hotplates
Clean the hotplates when they are warm (not
Do not leave acidic substances on the hot!). Use a cloth moistened with water and salt.
cooktop (vinegar, salt, lemon juice, etc.).Dry and clean with a cloth moistened with
cooking oil.
CARE AND MAINTENANCE OF THE
GLASS-CERAMIC COOKTOP
Clean the cooktop, when it is cool, after each
use. This will prevent the build-up of dirt and
make cleaning easier.
Use a clean cloth, absorbent kitchen wipes
and washing up liquid or a specific
glass-ceramic hob cleaner.
Remove baked-on dirt with the supplied
scraper tool and specific cleaning products.
Food spills should be cleaned off before they
bake onto the glass-ceramic surface.
Do not use abrasive products, bleach,
oven-cleaner sprays or pan scourers.
The cooktop should be treated periodically
with a proprietary brand of protective wax for
glass-ceramic hobs.
TROUBLESHOOTING GUIDE
Oven not workingCooktop not working
Switch the oven off and then on again to see Check for the presence of mains electrical
if the problem persists.power.
Check for the presence of mains electrical Check that the control know is not set to ?0?.
power. Set to ?OFF? the all-pole disconnect switch
Check that the oven selector is not on for a few minutes, then set it back to ?ON?.
position ?0?.
If the electronic display presents the
message ?STOP?, press the button 2 to
reset the oven and then set the clock (see the
Programmer Description Sheet supplied
separately).
If the electronic display shows the message
?Fxx?, contact the After Sales Service,
quoting the error code displayed.
25 |
ACEC
