CUSTOMER SERVICE
Before calling for Customer Service:
1. See if you can fix the problem yourself (with
the help of the "Trouble-Shooting Guide").
2. Restart the appliance to see if the problem
has cleared itself. If the result is negative,
disconnect the appliance and repeat the
operation after an hour.
3. If the problem persists, contact Customer
Service. Communicate:
the nature of the fault
the model
the Service number (the number after the
word SERVICE on the rating plate on the
inside of the appliance).
your complete addressNote:
your telephone number and area codeThe direction of door opening can be
changed; if this operation is performed by
Customer Service, it is not covered by the
warranty.
INSTALLATION
Install the freezer away from heat sourcDisconnecting the appliancees.
Exposure to direct sun rays or installation in It must be possible to disconnect the appliance
a hot environment or near heat sources by unplugging it or by means of a two pole switch
(heaters/radiators, cookers) must be fitted upline of the socket.
avoided, as this increases power
consumption.
The minimum distances must be respected:
30 cm from coal or petroleum cookers;
3 cm from gas and/or electric cookers.
Install the freezer in a dry, well-ventilated place.
Clean the inside (See the chapter "How to
defrost and clean the freezer").
Fit the accessories.
Electrical connection
The electrical connections must be made
in accordance with the local regulations.
Voltage, and power consumption are
indicated on the rating plate inside the
appliance.
Appliance earthing is compulsory by law.
The Manufacturer declines all liabilities
for injury to persons or animals or
damage to property resulting from failure
to observe these instructions.
If the plug and the socket are not of the same
type, have the socket replaced by a qualified
technician.
Do not use extension leads or multiple
adaptors.
16 |
ACEC
