CARE AND MAINTENANCE
Before cleaning or carrying out
maintenance, switch off the appliance and
turn off the water tap.
Cleaning the outside of the appliance:
To clean the outside of the appliance, use a
neutral detergent and a damp cloth.
Do not use abrasive detergents.
Cleaning the inside of the dishwasher:
Regularly wipe the door seal and inside of the
door with a damp cloth to remove any food
residues.
Upper spray arm:
1. Slacken the fixiAng nut ) (by turning it (
counter-clockwise) and detach the spray
arm (B) by pulling it down.
2. Rinse the nozzles.
3. Remount the spray arm by aligning it with the
rotary mounting and insert it.
4. Tighten the fixing nut by turning it clockwise.
Make sure the nut is fully tightened (it
should click).
Make sure the spray arm rotates freely.
Lower spray arm:
1. Press the two levers which fix the spray arm
inwards (C), and detach by pulling it uD).p (
2. Rinse the nozzles.
3. Remount the spray arm by aligning it with
the rotor pin and insert it.
4. Push the spray arm down firmly until it is
fixed in place.
5. Make sure the two levers are correctly
inserted (they should click).
Make sure the spray arm rotates freely.
Cleaning the filters:
1. Fully unscrew the wide-mesh central filter by
turning it counter-clockwise and extract it
(E).
2. Fully unscrew the fine-mesh filter and
extract it from the wide-mesh ce (Fntral filter) 5. Reassemble:
(pay due attention to the holes in the bInosert the fine-mesh fttom ilter in the wide-mesh
of the filter).central filter (pay due attention to the holes
in the bottom of the filter).
3. Remove the large filteG ). r (
4. Clean all filters regularly under running Insert the filter unit and fix it by turning it
clockwise. Make sure that the filters have
water, and check that no impurities are left been inserted correctly.
inside the dishwasher.
The filter unit must be correctly
assembled to ensure good wash results.
17 |
ACEC
