Before using the dishwasher, read the user instructions!
GB
GSFK 2584Quick Reference Guide
Indicators
On / Off buttonAdd regeneration salt
only add regeneration salt
immediately before starting a
wash programme.
Add rinse aid
Programme selectorNo water
check that the appliance fills with
water.
Wash cycle
Start button
Switches ?on? when the dishwasher Programme
Pre-RinseWashingDrying
is operating. Flashes when a fault end
occurs. Switches off at the end of
the programme.
Options
3)
Time and failure display
Switches off at programme start and
indicates the remaining time in hours and
minutes.
?F...? Information for the After-Sales
Service
?Delayed start? buttons
The wash cycle can be programmed to
start after 1 - 24 hours. Then press the
Start button. The dishwasher will start at
the set time.
2)3)
Programme chartDetergentConsumption
ProgrammesLoading instructionsABLitreskWh Minutes
Pre-RinsecoldCrockery to be washed later.--5.00.0210
Lightly soiled crockery,
Rapid 30 min40°CX-13.00.7030
with no dried-on food.
Standard1)50°CNormally soiled crockery.XX16.01.05120
Normally or heavily soiled
Normal65°CXX16.01.6590
crockery.
Heavily soiled crockery,
Intensive70°CXX22.02.15125
especially pots and pans.
1)Reference programme for energy label in 3)Values may vary in relation to usage, e.g.:
compliance with EN 50242 regulations;different loads, water temperatures - above or
2)Refer to ?User instructions?;below 15°C - as well as water hardness and power
supply voltage, etc.
5019 496 90103
(We reserve the right to make technical modifications)
BK/I/B/GB |