How to use the dishwasherUpper and lower rack
1. After loading the dishwasher, c6.losTurne the th e programme selector knob To raise: pull up thetwo side h andles Lower rack
door properly and open the water counter clockwise to the initial pountil thesition rack clicks into place.
supply tap.to switch off the dishwasher (only The racafter k must be level on both sides.A
2. The dishwasher switches on the Start indicator lamp has sCrwioctchkered y holders:
automatically as soon as the programoffme All th).e indicator lamps switc hDo wn: cups and long-stemmed glasses.A
selector knob is tuOne of the rned. off.Up: plates.
programme indicator lamps will 7. Open the door (warning: beware of hot
switch on.steam). Unload the lower rack before
3. Turn the selector knob to select ththee upper one. Close the water tap.
desired programmThee. corresponding Upper rack
C
indicator lamp lightIf reqs up. uired,
select options (if supplied).B
4. Press the Start button to start the
selected programmThee. S tart ?Vario Organizer? multi-purpose
Half Load:
indicator lamp will ligOnht up.ce set, support:
Loading the lower raonlcky g ives
the programmed data cannot be altered To be used, for example, for long-
greater washing power, especially for
by turning the programme selector knob.handled utens(ailsrra nge knives
plates and saucepans.
Note: once the Start button has been with the blade facing downwar ds),
pressed, the dishwasher memorises the cups and glasses.Plate holders:
last programme selected. This May be used in three different May be lowered to increase
information remains in the memory even positions (see ?Dishwasher also available spacA).e (
during interruption of the power supply.loading instructi? onons Page 4).A
Half Load:
To change the selected 1.Upon the left-hand side of the rack.
If the upper raconly is to bk e loaded, place
programme, press the Start button 2. Upside-down, towards the centre of
the cutlery bask ?B?e in thet upper rack.
for about 5 sec, untilonds the Start the rack.
indicator lamp switches off. 3. Upside-down, towards the left side.
Select a new programme using the
programme selector knob and
press the Start button.
Note: if the dishwasher is switched off Cutlery basket:
during a wash programme, when The cutlery basket can be removed to
switched on again it will resume the increase (B + C) available space.
wash cycle from where it was Some models are provided with a
interrupted.gridD () that can be fitted onto the
Only open the dishwasher door if cutlery basket.
strictly necessary during a wash
Glass holder:B
cycle and exercise maximum D
Rack height adjustment:
caution. Danger of scalding from
(The dishwasher is delivered with the upper
steam.
rack in the top position).
5. To indicate the end of the programme,
The rack height can also be changed
the Start indicator lamp switches off
when loaded.C
and the End indicator lamp (if fitted)
To lower: pull ou twt to sihede
switches on(for a bout 30 min..)
handles and gently lower the rack.
Please read the user instructions carefully. |
ACEC
