HOW TO FILL THE RINSE AID DISPENSER
The rinse aid facilitates drying and prevents the
formation of unsightly spots and streaks on
crockery. Before using the dishwasher for the
first time, fill the rinse aid dispenser.
How to fill the rinse aid dispenser:
Only use rinse aids recommended for use in
domestic dishwashers
1. Press button A to open the cover
(see drawing).
2. Fill the dispenser with rinse aid up to the
dashed lin?maxe ? (about 100 ml.).
Immediately wipe away any rinse aid spilt
accidentally.
This prevents the formation of excess suds
which may spoil washing results.
3. Replace the cover.
Thereafter, regularly check the rinse aid level.
How to adjust the rinse aid dosage
regulator:
Factory setting: position 4.
If you are not satisfied with washing or drying
results, change the rinse aid dosage setting.
1. Press buttoA ton open the cover (see
drawing).
2. If crockery is prone to whitish streaks, reduce
the dosage by turning the dial to a lower
setting (1-3) using a coin or the like.
If crockery is not perfectly dry, increase the
dosage by turning the dial to a higher setting
(5-6).
3. Close the cover again.
Rinse aid level indicator:
Visual indicator:
light= add rinse aid.
dark = sufficient rinse aid .
Additional electric indicator (if provided):
The indicator lamp on the control panel
lights up when more rinse aid needs to be added.
14 |
ACEC
