BM 1609929F52 10/03 10/28/03 3:34 PM Page 9
Operating Instructions
Hold the tool with bothand will return to "OFF" position!WARNING
hands while starting theautomatically.
tool, since torque from the motor can cause"LOCK-ON" BUTTON
the tool to twist.
(Models 1710 & 1711 only)
Start the tool before applying to work and letThe "Lock-ON" feature, incorporated into
the tool come to full speed before contactingthe paddle switch, is a convenience for long
the workpiece. Lift the tool from the workoperations.
before releasing the switch. DO NOT turn theTO LOCK SWITCH "ON": After paddle
switch OON� and OOFF� while the tool isswitch has been activated push "Lock-ON"
under load; this will greatly decrease thebutton at rear of tool completely in and
switch life.release paddle switch.
PADDLE SWITCH WITH TO SWITCH TOOL "OFF": Squeeze and
"LOCK-OFF"FEATURErelease paddle switch.
Models 1710D & 1711D only
The Paddle switch enables the operator to
control the switch functions of "Lock-OFF",
and "ON/OFF".
TO UNLOCK SWITCH AND TURN TOOL
"ON": Push "Lock-OFF" switch release lever
backward to unlock paddle switch, then
squeeze paddle switch.
TO SWITCH TOOL "OFF": Release pressure
on paddle lever. The switch is spring loaded
and will return to "OFF" position
automatically.PADDLE
SWITCH
PADDLE SWITCH WITH "LOCK-OFF" AND
"LOCK-ON" FEATURE
(Models 1710 & 1711 only)
The Paddle switch enables the operator to"LOCK-OFF"
control the switch functions of "Lock-OFF",SWITCH
RELEASE LEVER
"ON/OFF" and "Lock-ON".
TO UNLOCK SWITCH AND TURN TOOL
"ON": Push switch release lever backward to
unlock ON/OFF switch, then squeeze paddle"LOCK-ON" BUTTON
(Models 1710 & 1711 only)
switch.
TO SWITCH TOOL "OFF": Release pressure
on paddle lever. The switch is spring loaded
Grinding Operations
SELECTING GRINDING WHEELShardness, grit size and structure. The correct
Before using a grindingtype of wheel to use is determined by the
!WARNING
wheel, be certain that itsjob. Use disc grinding wheels for fast
maximum safe operating speed is notgrinding of structural steel, heavy weld
exceeded by the nameplate speed of thebeads, steel casting, stainless steel and
grinder. Do not exceed the recommendedother ferrous metals.
wheel diameter.
GRINDING TIPS
DISC GRINDING WHEELSEfficient grinding is achieved by controlling
Grinding wheels should be carefully selectedthe pressure and keeping the angle between
in order to use the grinder most efficiently.wheel and workpiece at 10! to 15!. If the
Wheels vary in type of abrasive, bond,wheel is flat, the tool is difficult to control. If
-9- |
ACEC
