MO0607-EB
Operation Guide 4334
Getting Acquainted
Congratulations upon your selection of this CASIO watch. To get the most out of your
About This Manual
purchase, be sure to read this manual carefully.
? Button operations are indicated using the letters shown(Light)
in the illustration.
? For the sake of simplicity, the sample displays in this
Warning!manual do not show the analog hands of the watch.
? The measurement functions built into this watch are not intended for use in taking? Depending on the model of your watch, display text
measurements that require professional or industrial precision. Values producedappears either as dark figures on a light background, or
by this watch should be considered as reasonably accurate representations only.light figures on a dark background. All sample displays
? CASIO COMPUTER CO., LTD. assumes no responsibility for any loss, or anyin this manual are shown using dark figures on a light
claims by third parties that may arise through the use of this watch.background.
? Each section of this manual provides you with the
information you need to perform operations in each
mode. Further details and technical information can be
found in the ?Reference? section.
General GuideCountdown Timer
Recall ModeMode
? Press C to change from mode to mode.
? In any mode, press L to illuminate the display.
Stopwatch ModesThis watch has two
stopwatch modes. See2Press C.2
2?Stopwatches? for more
TimeKeeping Modeinformation.
World Time Mode
Alarm Mode
Hand Setting Mode
2222
Timekeeping
Use the Timekeeping Mode to set and view the currentDaylight Saving Time (DST) Setting
Thermometertime and date.Daylight Saving Time (summer time) advances the time setting by one hour from
Month � DayThis watch features separate digital and analogStandard Time. Remember that not all countries or even local areas use Daylight
Day of weektimekeeping. The procedures for setting the digital timeSaving Time.
and analog time are different.
? See ?Thermometer? for details about the thermometer.To toggle the Timekeeping Mode digital time between DST and Standard Time
1.In the Timekeeping Mode, hold down A until the
Setting the Digital Time and DateDST indicatorseconds start to flash, which indicates the setting
screen.
This watch is preset with UTC differential values that
represent each time zone around the globe. Before settingll2. Press C once and the DST setting screen appears.lll
the digital time, be sure to first set the UTC differential forll3. Press D to toggle between Daylight Saving Time (ONll
Secondsldisplayed) and Standard Time (OF displayed).
your Home Time, which is the location where you normallyHour : Minuteslllll4. Press A to exit the setting screen.
will be using the watch.l
PM indicator? Note that World Time mode times are all displayedlllll? The DST indicator appears on the Timekeeping, Alarm,
llland Hand Setting Mode screens to indicate that
based on the time and date settings you configure in thellll
Timekeeping Mode.Daylight Saving Time is turned on.
To set the digital time and dateOn/Off status
1.In the Timekeeping Mode, hold down A until the
seconds start to flash, which indicates the settingSetting the Analog Time
screen.Perform the procedure below when the time indicated by the analog hands does not
? Be sure to configure the correct UTC differential formatch the time of the digital display.
lllllyour Home Time before configuring any otherllllTo adjust the analog time
lllllllTimekeeping Mode settings.
? See the ?UTC Differential/City Code List? for1.In the Timekeeping Mode, press C six times to enter
information about the UTC differential settings that arethe Hand Setting Mode.
Secondssupported.2.Hold down A until the current digital time starts to
2.Press C to move the flashing in the sequence shownflash, which indicates the setting screen.
below to select other settings.llllllll3. Use D to adjust the analog setting.l
l? Press D once to advance the hands 20 seconds.
llllllll
SecondsDSTUTC HourDifferentialMinutes12/24-Hour ? Hold down D to advance the hands at high speed.
Format
Temperature Temperature Sensor DayMonthYear? To lock high speed hands movement, hold down D to start it and then press Bto lock. The hands will continue to advance for one 12-hour cycle or until you
UnitCalibration
press any button to stop it.
3. When the setting you want to change is flashing, use D and B to change it asHigh-speed hand movement also will stop automatically after the time advances
described below.12 hours or if an alarm (daily alarm, Hourly Time Signal, or countdown beeper)
Screen:To do this:Do this:starts to sound.
Reset the seconds to 00Press D.4. Press A to exit the setting screen.
? The minute hand will be adjusted slightly to match the seconds when you exit the
setting screen.
Toggle between Daylight SavingPress D.
? To return to the Timekeeping Mode, press C.
Time (ON) and Standard Time (OF)
Specify the UTC differentialUse D (+) and B (-).
Stopwatches
Change the hour or minutesUse D (+) and B (-).
Your watch has two stopwatch modes: a Single Stopwatch
Mode and a Dual Stopwatch Mode. Both stopwatch
Toggle between 12-hour (12H) andPress D.modes measure times in 1/100-second units for the first
24-hour (24H) timekeepinghour, and in 1-second units after that. In both stopwatch
Change the yearUse D (+) and B (-).modes, timing is possible up to 99 hours, 59 minutes,
59.99 seconds.
Change the month or dayThe Single Stopwatch Mode (ST1) displays the total
elapsed time and lap times for a single vehicle or runner.
? The UTC differential setting range is -12.0 to +14.0, in 0.5-hour units.The Dual Stopwatch Mode (ST2) can be used to measure
? For information about settings other than the time and date, see the following.elapsed time for two vehicles or runners at the same time,
Temperature Sensor Calibration: OThermometer�including separate lap times and the time differential
Temperature Unit: OThermometer�between vehicles or runners.
4. Press A to exit the setting screen.The data produced by either stopwatch mode is stored
? The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode isautomatically in watch memory, for later recall when you
applied in all modes.need it.
? The day of the week is displayed automatically in accordance with the date (year,? When the elapsed time being kept by either of the stopwatches exceeds 99 hours,
month, and day) settings.59 minutes, 59.99 seconds, the displayed time returns to all zeros and time
? When DST is turned on, the UTC differential setting range is -11.0 to +15.0, in 0.5-measurement continues from there. Elapsed time measurement continues until you
hour units.reset it to all zeros.
? Any time the seconds setting is changed, the analog hands are adjusted accordingly.? All of the operations in this section are performed in the stopwatch modes, which
? See ?Daylight Saving Time (DST) Setting? below for details about the DST setting.you enter by pressing C.
1 |
ACEC
