Operation Guide 2759/3344
AlarmsModeGraphic Area AGraphic Area B
You can set five independent Daily Alarms. When anTimekeepingTimekeeping Mode secondsTimekeeping Mode minutes
Alarm numberalarm is turned on, the alarm tone sounds when the alarmWorld TimeTimekeeping Mode secondsWorld Time Mode minutes
time is reached. One of the alarms is a snooze alarm,Countdown TimerCountdown time minutesCountdown time seconds
while the other four are one-time alarms.StopwatchStopwatch time secondsStopwatch time 1/10-second
You can turn on an Hourly Time Signal that causes the
AlarmNo indicationNo indication
watch to beep twice every hour on the hour.
" There are six screens in the Alarm Mode. Four are forHand SettingNo indicationNo indication
one-time alarms (indicated by numbers from
AL1through AL4), one is for a snooze alarmAuto Return Feature
(indicated by SNZ), and one is for the Hourly TimeIf you leave a screen with flashing digits on the display for two or three minutes
Signal (indicated by SIG).without performing any operation, the watch automatically exits the setting screen.
On/Off status" All of the operations in this section are performed in the
Alarm timeAlarm Mode, which you enter by pressing C.Scrolling
(Hour : Minutes)
The B and D buttons are used in various modes and setting screens to scroll
To set an alarm timethrough data on the display. In most cases, holding down these buttons during a scroll
1.In the Alarm Mode, use D to scroll through the alarmoperation scrolls through the data at high speed.
screens until the one whose time you want to set is
displayed.Initial Screens
When you enter the World Time or Alarm Mode, the data you were viewing when you
last exited the mode appears first.
Timekeeping
" Resetting the seconds to 00 while the current count is in the range of 30 to 59
causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are
" To set a one-time alarm, display one of the screens indicated by an alarm numberreset to 00 without changing the minutes.
from AL1through AL4. To set the snooze alarm, display the screen indicated" With the 12-hour format, the P (PM) indicator appears on the display for times in the
by SNZ.range of noon to 11:59 p.m. and no indicator appears for times in the range of
" The snooze alarm repeats every five minutes.midnight to 11:59 a.m.
2. After you select an alarm, hold down A until the hour setting of the alarm time" With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without
starts to flash, which indicates the setting screen.any indicator.
" This operation automatically turns on the alarm." The year can be set in the range of 2000 to 2039.
3. Press C to move the flashing between the hour and minute settings." The watchOs built-in full automatic calendar makes allowances for different month
4. While a setting is flashing, use D (+) and B (�) to change it.lengths and leap years. Once you set the date, there should be no reason to change
" When setting the alarm time using the 12-hour format, take care to set the timeit except after you have the watchOs batteries replaced.
correctly as a.m. (no indicator) or p.m. (P indicator).
5. Press A to exit the setting screen.World Time
" The World Time Mode times are calculated from the current Home City time setting
Alarm Operationin the Timekeeping Mode, using the Greenwich Mean Time (GMT) differentials
The alarm sounds at the preset time for about 20 seconds, regardless of the mode theassociated with each city code.
watch is in. In the case of the snooze alarm, the alarm operation is performed a total" The GMT differential is a value that indicates the time difference between Greenwich
of seven times, every five minutes, or until you turn the alarm off.Mean Time and the time zone where a city is located.
" To stop the alarm tone after it starts to sound, press any button." GMT differential is calculated by this watch based on Universal Time Coordinated
" Performing any one of the following operations during a 5-minute interval between(UTC) data.
snooze alarms cancels the current snooze alarm operation.
Displaying the Timekeeping Mode setting screenIllumination Precautions
Displaying the SNZ setting screenThis watch has an EL (electro-luminescent) panel that causes the entire display to
glow for easy reading in the dark. In any mode, press B to illuminate the display for
To test the alarmabout two seconds.
In the Alarm Mode, hold down D to sound the alarm." The electro-luminescent panel that provides illumination loses power after very long
use.
To turn an alarm on and off" Display illumination may be hard to see when viewed under direct sunlight.
1.In the Alarm Mode, use D to select an alarm." Illumination automatically turns off whenever an alarm sounds.
Alarm on 2.Press A to toggle it on (ON displayed) and off" The watch may emit an audible sound whenever the display is illuminated. This is
indicator(OF displayed).
due to vibration of the EL panel used for illumination, and does not indicate
" Turning on a one-time alarm (AL1through AL4)malfunction.
displays the alarm on indicator on its Alarm Mode" Frequent use of illumination runs down the battery.
screen.
" Turning on the snooze alarm (SNZ) displays the alarm
on indicator and snooze alarm indicator on the Alarm
City Code Table
Mode snooze alarm screen.
On/Off status" In all modes, the alarm on indicator is shown for any
CityCityGMTOther major cities in same time zone
Alarm on Snooze alarm alarm that is currently turned on.CodeDifferential
indicatorindicator" The alarm on indicator flashes while the alarm is� � ��11.0Pago Pago
sounding.HNLHonolulu�10.0Papeete
" The snooze alarm indicator flashes during the 5-minuteANCAnchorage�09.0NomeSan Francisco, Las Vegas, Vancouver, Seattle/Tacoma,
intervals between alarms.LAXLos Angeles�08.0Dawson City
DENDenver�07.0El Paso, Edmonton
CHIChicago�06.0Houston, Dallas/Ft. Worth, New Orleans,
Module 3344Mexico City, Winnipeg
NYCNew York�05.0Montreal, Detroit, Miami, Boston, Panama City,
To turn the Hourly Time Signal on and offHavana, Lima, Bogota
1.In the Alarm Mode, use D to select the Hourly TimeCCSCaracas�04.0La Paz, Santiago, Pt. Of SpainRIO Rio De Janeiro�03.0Sao Paulo, Buenos Aires, Brasilia, Montevideo
Signal (SIG).� � ��02.0
2.Press A to toggle it on (ON displayed) and off� � ��01.0Praia
(OF displayed).GMT+00.0Dublin, Lisbon, Casablanca, Dakar, Abidjan
" The Hourly Time Signal on indicator is shown on theLONLondon
display in all modes while the Hourly Time Signal isPARParis+01.0Milan, Rome, Madrid, Amsterdam, Algiers, Berlin,
Hamburg, Frankfurt, Vienna, Stockholm
turned on.CAICairo+02.0Athens, Helsinki, Istanbul, Beirut, Damascus,
JRSJerusalemCape Town
On/Off statusJEDJeddah+03.0Kuwait, Riyadh, Aden, Addis Ababa, Nairobi, Moscow
THRTehran+03.5Shiraz
Hourly time signal DXBDubai+04.0Abu Dhabi, Muscat
on indicatorKBLKabul+04.5
KHIKarachi+05.0Male
DELDelhi+05.5Mumbai, Kolkata
DACDhaka+06.0Colombo
RGNYangon+06.5
BKKBangkok+07.0Jakarta, Phnom Penh, Hanoi, Vientiane
Module 3344HKGHong Kong+08.0Singapore, Kuala Lumpur, Beijing, Taipei, Manila,
Perth, Ulaanbaatar
TYOTokyo+09.0Seoul, Pyongyang
ReferenceADLAdelaide+09.5Darwin
SYDSydney+10.0Melbourne, Guam, Rabaul
This section contains more detailed and technical information about watch operation.NOUNoumea+11.0Pt. Vila
It also contains important precautions and notes about the various features andWLGWellington+12.0Christchurch, Nadi, Nauru Is.
functions of this watch.*Based on data as of June 2003.
Graphic Areas
The following describes the information indicated by the two graphic areas in each
mode.
Graphic area A
Graphic area B
Module 2759Module 3344
3 |
ACEC
