MAINTENANCEGB
Unplug the appliance before carrying outInterior light
any maintenance operation.
The light bulb inside the refrigerator
compartment can be reached as follows:
Internal cleaning
Never use metal objects for clearing yournunscrew the light cover securing screws;
appliance as it may get damaged.
nunhook the moving part by pressing it as
When performing a complete defrosting, washshown in the figure.
the internal surfaces of the freezer with
lukewarm water and bicarbonate; rinse andIf the door is open and the light does not come
then accurately dry.on, check that the bulb is properly screwed in; if
it still does not work, replace the bulb with one
External cleaningof the same power.
Wash the outer body with lukewarm water andThe maximum rating is shown on the light
soap. Periodically use a clearing polish tocover.
keep the outer body shining. Dust the
condenser located behind the freezer with a
soft brush or a vacuum cleaner. An excessiveFig .17
accumulation of dust might compromise the
freezerOs efficiency.
Extended periods of non-
operation
Whenever the freezer is not to be used for an
extended period of time, disconnect it from the
wall socket and empty and clean the freezer.
Remember to leave the door open for the
entire period of time in which the freezer is notD411
to be used.
DEFECTIVE OPERATIONGB
Before calling your local dealer for servicing
assistance, check the following points to see ifIf defective operation continues after these
you may not resolve the problem yourself:
controls, call your local Service Network and
provide all the data listed on the rating plate:
Make sure that the freezer is plugged into themodel, serial number, etc.
wall socket correctly, and that electrical current
arrives to the freezer without interruption.
Control the thermostat setting.
In the event that the freezer makes excessive
noise or vibration, make sure that it is not in
direct contact with the wall or adjacent furniture.
20 |
ACEC
