SpecificationsTo Add the Active Subwoofer System(User optional)
SUBwoofer SPEAKER PLACEMENT
General specifications
Power supplyPower consumption Standby 2WattAlthough the subwoofer can be installed in almost any location within the room, including next to an
Voltage ( Option )Operating 80Wattaudio component system, deep bass reproduction is enhanced when it is installed in a corner or
AC 110V or 120V or 127V or near a wall.
Dimensions (W x D x H) / Weight
220V or 230V or 240V (50/60Hz)
360 x 380 x 70mm/ 6.7 kgBecause the propagation characteristics of low bass in music are omnidirectional, only one
subwoofer may be sufficient for bass enhancement.
Front Amp. Section
CONNECTIONS
POWER OUTPUT at 1% THD(DIN)At 1KHz, 8 ohms30W
Caution!
THD(Total Harmonic Distortion)At 1KHz, 1W1%
Input Sen. / Impedance @ 1KHz, 47K ohmsVIDEO, TV/AUX200mV 30mV/47KBefore making the connections and avoid damage to the amplifier or receiver and/or subwoofer
Output Level/Impedance @ 1KHzTape Rec200mV 30mV/2.2KWhen connecting the subwoofer to an amplifier or receiver(not include), use the RCA
Frequency Response(Analogue)at 1W : TAPE, VIDEO -3dB20Hz~20KHz
Cable(Provided with subwoofer) with a dedicated subwoofer jack.
S/N Ratio IHF-A WeightedTAPE, VIDEO70dB
Subwoofer Turnover Frequency120Hz
Channel Separation1KHz55dB
CrosstalkVIDEO -->TV/AUX65dB
TV/AUX--> VIDEO65dB
Center Amp Section
POWER OUTPUT at 1% THD(DIN)At 1KHz, 8 ohms30W
TOTAL HARMONIC DISTORTIONAt 1KHz, 1W1%
S/N RATIO, IHF-A FILTERRated Output60dB
FRE. RESPONSE LARGE1W20Hz~20KHz
DOLBY MODE SMALL1W135Hz~18KHz
Rear Amp Section
POWER OUTPUT 1% THD(DIN)At 1KHz, 8 ohms30W
TOTAL HARMONIC DISTORTIONAt 1KHz, 1W1%
S/N RATIO DOLBYRated Output65dB
FREQUENCY RESPONSE LARGE1W20Hz~20KHz
(Dolby Digital) SMALL1W135Hz~18KHz
Subwoofer Section
POWER OUTPUT at 10% THDAt 100Hz, 8 ohms30W
FREQUENCY RESPONSE1W20Hz~150Hz
S/N RATIO, IHF-A Weight60dB
Video Section
Input Sen./ImpedanceComposite Video(Video)1Vp-p/75 ohm0.5 dB
Output Level/ImpedanceComposite 75 ohm1Vp-p/75 ohm0.5 dB
Others
S-Video(Y/C) 75 ohm(DVD only)1Vp-p/ 0.286Vp-p0.5 dB
Component Out(Y/ Cb/ Cr):Option1Vp-p/0.7Vp-p/0.7Vp-p0.5 dB
Frequency ResponseRef 500KHz5Hz~5.7MHz
Crosstalk@1MHz45dB40dB
S/N RatioDVD60dB
FM Tuner Section (FM ANT Impedance : 75 ohms)
Tuning RangeUSA Version87.5~108.0MHz
Europe Version87.5~108.0MHz
ScanningUSA Version100KHz
Frequency IntervalEurope Version50KHz
Usable Sensitivity,S/N=30dB,USA Version2uV(17.2dBf)
75 ohmsS/N=26dB,Europe Version3uV(20.8dBf)
Mono USA Version70dB
S/N Ratio @1mVMono Europe Version70dB
IHF-A FILTERStereo USA Version65dBSpecifications are subject to change without notice.
Stereo Europe Version63dB
4041 |
ACEC
