E-MU 9116_EMU Instruction Manual

Basic Operations
Main Screen
Main ScreenThe Preset Select screen is Proteus 1000Os default screen (also called the
main screen) and is active when you have not selected any of the other
button-activated menus. From this screen you can change or examine the
Preset, Volume, Pan Position and Preset Location for each of the 16 MIDI
channels.
ROM or RAM Preset Location
MIDI Channel
C01 Vol127 Pan01User
R
2
032 bas: Interference
MIDI Channel To Change the MIDI Channel
Selection1.Press either cursor button until the cursor is underneath the channel
number. (The cursor is the little �ashing line underneath one of the
parameters in the display.)
yyyyThe channel number 2.Rotate the Data Entry Control to select a MIDI channel (01-16). As the
shown in the main screen is the channel number changes, the display changes to show the preset,
Obasic MIDI channel� when in volume, pan and preset location associated with the displayed channel.
Omni or Poly modes.
Preset Selection To Change the Preset
1.Press either cursor key until the cursor is underneath the preset number.
(The cursor is a little �ashing line underneath one of the parameters in
the display.) As you rotate the Data Entry Control, the preset number
and name changes.
2.The displayed preset is assigned to the displayed MIDI channel. Presets
are arranged into banks of 128, as shown in the diagram at left.
BankContents
0128 RAM PresetsBank Number
1128 RAM Presets
2128 RAM Presets
USERPreset
C01 Vol127 Pan01User
3128 RAM PresetsNumberR
0128 ROM Presets2
032 bas: Interference
1128 ROM Presets
ROM 1 2128 ROM Presets
??Depending on
Using the screen above as an example, the superscripted number 2 in the
ROM sets installed
second line of the display identiŢes the current bank number.
26 E-MU Systems