SETUP
Manual Convergence Adjustment Mode (117 Point Manual Adjustment)
NOTES: 1. Please turn ON your television for at least 20 minutes before using this feature.
2. Auto Adjustment Mode is recommended. If convergence is still not acceptable, use the Manual Adjustment Mode.
3. If Auto Adjust mode is selected or the Magic Focus button is pressed, all manual adjust mode settings will be erased.
Using the Remote Control, select SETUPMAGIC FOCUS TUNE UPMANUAL ADJUSTMENT MODE117 POINT
MANUALSTART to access convergence 117 point pattern. The adjustment point is indicated by the Adjustment Point Cursor.
To Move Adjustment Point
To move the adjustment point cursor using the CURSOR buttons, the Adjustment Cursor must be WHITE. Another way to move the
Adjustment Point Cursor is to press the following buttons: [2] up, [4] left, [5] down, [6] right. If you use the number buttons while the
adjustment point is WHITE, it will change to RED.
To Change the Color of Adjustment Point
Press the SELECT button repeatedly (WHITE-RED-BLUE-WHITE...). Green color is fixed and cannot be adjusted.
To Adjust the Convergence
Move the Adjustment Cursor to the point to be adjusted. Use the CURSOR buttons to match the RED and BLUE colors to GREEN
(reference color). Properly aligned, all three colors should appear white.
VideoSetup
AudioMagic Focus Tune Up
AspectMenu Preference
Set The Inputs
Chan. Manager
Set Virtual HD
Locks
Set Black Side Panel
TimersSet Closed Captions
SetupSet Monitor Outor
MoveSELSelSet AV Control
About Your TV
MoveSEL Select
6 times
Adjustment Point
or
Cursor
Setup
Magic Focus Tune Up
Aligns the Red, Green, and Blue
colors to correct for Magnetic
Influences.
Adjustment Mode
Auto
9 Point Manual
117 Point Manual
If you want to adjust nowStart
MoveSEL Return
If convergence is acceptable after Manual Convergence adjustment, press EXIT button to access menu mode.
Setup
Magic Focus Tune Up
Manual Adjust
Please make a selection from
the options below
Cancel
Done
Back
Reset
ON-SCREEN DISPLAY
MoveSEL Select
Use the CURSOR buttons to highlight your chosen option. Press the SELECT button to select.
Select CANCEL to cancel adjusted data and return to main picture.
Select DONE to save your adjustments and return to the main picture.
Select BACK to return to the manual convergence adjustment mode.
Select RESET to recall the factory pre-set convergence data.
58 |
ACEC
