Installation and Connections
How to Route CablesEnglish
Speed clamps and bead bands are included with this unit
for bunching cables together. Once components are
connected, follow the following steps to route cables.
* As viewed from the rear of the display.
1
2
1Organize cables together using the provided2Bunch separated cables together and secure
speed clamps.them with the provided bead bands.
Insert 1 into an appropriate hole on the rear of the
unit, then snap 2 into the back of 1 to fix the clamp.Note
Cables can be routed to the right or left.
Speed clamps are designed to be difficult to undo
once in place. Please attach carefully.
To attach the speed clamps to the main unit
Connect the speed clamps using the 4 holes marked with Y
below, depending on the situation.Installation and Connections
To remove speed clamps
Using pliers, twist the clamp 90! and pull it outward.
In some cases the clamp may have deteriorated over
time and may be damaged when removed.
13
En |
ACEC
