SAFETY INSTRUCTIONS
Checking, maintaining and servicing WARNING! Bear in mind that:
the machine2222s safety equipment!
Engine exhaust fumes contain carbon IMPORTANT!
monoxide, which can cause carbon All servicing and repair work on the machine requires
monoxide poisoning. For this reason you special training. This is especially true of the machine2s
should not start or run the machine indoors,
or anywhere that is poorly ventilated. safety equipment. If your machine fails any of the checks
described below you must contact your service agent.
The exhaust fumes from the engine are hot When you buy any of our products we guarantee the
availability of professional repairs and service. If the retailer
and may contain sparks which can start a
Å¢re. Never start the machine indoors or near who sells your machine is not a servicing dealer, ask him for
combustible material!the address of your nearest service agent.
The life span of the machine can be reduced and the risk of
Cutting equipmentaccidents can increase if machine maintenance is not
carried out correctly and if service and/or repairs are not
Saw blades are intended for cutting Ţbrous types of wood.carried out professionally. If you need further information
please contact your nearest service workshop.
Throttle lock
Y Make sure the throttle control is locked at the idle setting
when the throttle lock is released.
Grass blades and grass cutters are intended for cutting
coarse grass.
Y Press the throttle lock and make sure it returns to its
original position when you release it.
A trimmer head is intended for trimming grass.
Locking nut
Y Check that the throttle control and throttle lock move freely
A locking nut is used to secure some types of cutting
attachment.and that the return springs work properly.
The throttle lock is designed to prevent accidental operation
of the throttle control. When you press the lock (A) (i.e. when
you grasp the handle) it releases the throttle control (B).
When you release the handle the throttle control and the
throttle lock both move back to their original positions. This
movement is controlled by two independent return springs.
This arrangement means that the throttle control is
automatically locked at the idle setting.
6 � English |
ACEC
