ASSEMBLY
Correct height3 Adjust the shoulder strap to distribute the load evenly
1 Forestry clearing across your shoulders. Press downwards on the
suspension hook to load the harness.
The machine should be supported in a harness when
forestry clearing so that the cutting equipment is angled
slightly forwards in relation to the ground. Adjust the
height using the strap on the harness for the support
hook.
4 Adjust the height of the suspension hook as described in
the instructions for the standard harness. (Forestry
clearing)
2 Grass clearing
The machine should be supported in a harness when
grass clearing so that the cutting equipment is parallel to 5 If you need to lower the suspension hook, for trimming for
the ground.example, move the suspension strap (A) to the lower
mounting point on the backplate.
6 The elastic strap (B) can be tightened to transfer more
load from the shoulder straps to the hip strap.
Triobalance harness
Safety release
Push down the red release lever to release the machine from Correct balance
the harness.
1 Forestry clearing
The machine is balanced by moving the support ring on
the machine forwards or backwards. On some models the
support ring is Ţxed, however, this will then have a number
of holes for the support hook. The machine is correctly
balanced when it freely hangs horizontally from the
support hook. In this way the risk of hitting stones is
reduced if you need to release the handlebar.
Adjusting the harness
1 Tighten the hip strap so that it sits securely.
2 Tighten the chest strap under your left arm so that it Ţts 2 Grass clearing
closely around your body.
Let the blade balance at a comfortable cutting height, i.e.
close to the ground.
24 � English |
ACEC
