KEY TO SYMBOLS
SymbolsOnly intended for trimmer heads.
WARNING! Clearing saws, brushcutters and
trimmers can be dangerous! Careless or
incorrect use can result in serious or fatal
injury to the operator or others.
Please read the operatorOs manual carefully
Noise emission to the environment
and make sure you understand the
according to the European CommunityOs
instructions before using the machine.
Directive. The machineOs emission is
speciŢed in chapter Technical data and on
Always wear:
label.
Y A protective helmet where there is a risk
of falling objectsOther symbols/decals on the machine refer to special
certiŢcation requirements for certain markets.
Y Hearing protection
Y Approved eye protection
Switch off the engine by moving the stop
switch to the STOP position before carrying
Max. speed of output shaft, rpmout any checks or maintenance.
Always wear approved protective gloves.
This product is in accordance with
applicable EC directives.
Regular cleaning is required.
Watch out for thrown objects and ricochets.
Visual check.
The operator of the machine must ensure,
while working, that no persons or animals
come closer than 15 metres.15 m
15 m
50FTApproved eye protection must always be 50FT
used.
Machines Ţtted with saw blades or grass
blades can be thrown violently to the side
when the blade comes into contact with a
Å¢xed object. The blade is capable of
amputating an arm or leg. Always keep
people and animals at least 15 metres from
the machine.
Arrows which show limits for handle
positioning.
Always wear approved protective gloves.
Wear sturdy, non-slip boots.
Only use non-metallic, �exible cutting
attachments, i.e. trimmer heads with trimmer
cord.
2 � English |
ACEC
