DETERGENT AND ADDITIVES
FILLING THE DETERGENT AND Notes:
ADDITIVES When using highly concentrated detergents,
1. Pull out the detergent drawer.use the detergent ball provided with the
The drawer has three chambers.detergent and place it directly in the drum to
avoid dispensing problems (for programmes
2. Filling the detergent.without pre-wash only).
For programmes with prewash: liquid
detergents can be used for the prewash. Programmes with pre- and main
For the main wash then a powder detergent wash.
Main wash programme without has to be used.
prewash. Dose the correct amount of concentrated
fabric softener and dilute with water up to the Add fabric softeners and
maximum level marked in the softener conditioners no further than the
compartment.?Max? mark.
Stain remover.
Water softener
(water hardness class 4).
Starching.
Dissolve/dilute the starch, powder
or liquid, in approximately 1 litre of
water in a container. Load the
machine, close the door, select
?Rinse and Spin? and start. Once
the machine has started filling, pour
the dissolved starch into detergent
dispenser chamber . Flush the Detergent drawer with 3 chambers.
chamber straight away by adding
about half a litre of water.
3. Slide the drawer in until it clicks shut.
LIQUID DETERGENTS
Some machines are supplied with a detachable
insert for the use of these products. This insert
should be inserted into the main wash
chamber of the detergent drawer.
Fill the insert with detergent no further than the
?Max? mark and run the programme in the normal
way.
23 |
ACEC
